Playing A Cassette Tape - Buick 2004 Rendezvous Owner's Manual

Radio Display
Message
Unknown
Chk XMRcvr

Playing a Cassette Tape

The longer side with the tape visible should face to the
right. If the ignition and the radio are on, the tape
can be inserted and will begin playing. If you hear
nothing or hear a garbled sound, the tape may not be in
squarely. Press the eject button to remove the tape
and start over.
While the tape is playing, use the VOLUME and AUDIO
controls just as you do for the radio. The display will
show an arrow to show which side of the tape is playing.
If you want to insert a tape while the ignition or radio
is off, first press the eject or DISP button. Cassette tape
adapter kits for portable CD players will work in your
cassette tape player.
Your tape bias is set automatically.
XM™ Radio Messages (cont'd)
Condition
Radio ID not known
(should only be if
hardware failure)
Hardware failure
Action Required
If you receive this message when you tune to channel 0,
you may have a receiver fault. Consult with your dealer.
If this message does not clear within a short period of time,
your receiver may have a fault. Consult with your retail
location.
If an error appears on the display, see "Cassette Tape
Messages" later in this section.
1 s (Reverse): Press this pushbutton to reverse the
tape rapidly. The radio will play while the tape reverses.
Press this pushbutton again to return to playing
speed.
2 \ (Forward): Press this pushbutton to advance
quickly to another part of the tape. The radio will play
while the tape advances. Press this pushbutton again to
return to playing speed.
6 SIDE: Press this pushbutton to play the other side of
the tape.
3-93