1. Manuals
  2. Brands
  3. Baudcom Manuals
  4. Touch terminals
  5. BD-ONU-214HW-AC
  6. User manual

Baudcom BD-ONU-214HW-AC User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD
XPON AC ONU USER MANUAL
(4GE+4WIFI+1USB+1POTS)
Model:BD-ONU-214HW-AC
Version V1.0
Release Date 2020-06-15
Website :
www.baudcom.com.cn
Tel: +86 21 37709251
Email: info@baudcom.com.cn

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BD-ONU-214HW-AC and is the answer not in the manual?

Questions and answers

Related Manuals for Baudcom BD-ONU-214HW-AC

Summary of Contents for Baudcom BD-ONU-214HW-AC

  • Page 1 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD XPON AC ONU USER MANUAL (4GE+4WIFI+1USB+1POTS) Model:BD-ONU-214HW-AC Version V1.0 Release Date 2020-06-15 Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...

  • Page 2: Table Of Contents

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Contents Chapter 1 Product Introduction ............................4 1.1 Product Description ............................... 4 1.2 Special features ................................4 1.3 Technical Parameter ..............................4 1.4 Connection Diagram ..............................5 1.5 Panel lights Introduction ..............................6 1.6 Application chart ................................6 Chapter 2 Quick Installation .............................
  • Page 3 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.6.2 Firewall ................................. 30 3.7 VoIP ....................................34 3.7.1 VoIP ..................................34 3.8 Advance ..................................38 3.8.1 Advance ................................38 3.8.2 IP Qos ..................................40 3.8.3 IPv6 ..................................41 3.9 Diagnostics ..................................45 3.9.1 Diagnostics ................................46 3.10 Admin ...................................

  • Page 4: Chapter 1 Product Introduction

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Chapter 1 Product Introduction 1.1 Product Description Thank you for choosing the 4GE+2.4&5G WIFI+USB+POTS XPON ONU. The product is designed as HGU (Home Gateway Unit) in different FTTH solutions. The carrier-class FTTH application provides data service access and voice service.

  • Page 5: Connection Diagram

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Flash SPI NAND Flash 128MB LAN Interface 4 x 10/100/1000Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector Compliant with IEEE802.11b/g/n,ac 2.4G Operating frequency:2.400-2.4835GHz 5.8G Operating frequency:5.150-5.825GHz Wireless 2.4G 2*2 MIMO, rate up to 300Mbps 5.8G 2*2 MIMO ,rate up to 867Mbps...

  • Page 6: Panel Lights Introduction

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 1.5 Panel lights Introduction Pilot Lamp Status Description The device is powered up. The device is powered down. Blink The device doses not receive optical signals or with low signals. The device has received optical signal.
  • Page 7 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 1-2: Application chart Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...

  • Page 8: Chapter 2 Quick Installation

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Chapter 2 Quick Installation 2.1 Standard Packing Contents When you receive our products, please check carefully to make sure that our products whether have some defects or not. If something wrong with shipping, please contact carrier; other damage or lack of some parts, please contact with dealer.

  • Page 9: Quick Installation

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 2.2 Quick Installation 1. Connecting the optical fiber cable to the unit. a) Remove the protective cap of the optical fiber. b) Clean the end of the optical fiber with an optical fiber end cleaner.

  • Page 10: Chapter 3 Configuration

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Chapter 3 Configuration After finishing the basic connection configuration, you can use its basic function. In order to satisfy individuation service requirements, this charter provides the user parameter modification and individuation configuration description. 3.1 Login The device is configured by the web interface.

  • Page 11: Status

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.2 Status This part shows the main information of device and the active status about major services. 3.2.1 Device Information This page shows the basic information about current device, such as Device Name、Firmware version、LAN and WAN configuration.

  • Page 12: Pon Information

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-3:IPv6 Status 3.2.3 PON Information This page shows the main information of PON module(Tx Power/Rx Power) and EPON/GPON register Status. Figure 3-4:PON Status 3.2.4 VoIP Information This page shows the register status of Pots.Attention,users need to configure the part of VoIP Configuration.Otherwise,it could not be registered.

  • Page 13: Lan

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-5: Phone Register Status 3.3 LAN 3.3.1 LAN Interface Settings This part supports the management of the ONU's IPv4 address,user can change ONU LAN IP address according local network application and enable/disable IGMP Snooping configuration.

  • Page 14: Wlan

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.4 WLAN This part supports to deploy WLAN (WiFi) Configuration, including 5G WIFI and 2.4G WIFI. Attention:5G and 2.4G WIFI configurations are separate and work independently. 3.4.1 WLAN0 （5GHz） This part is about WLAN0 5G WIFI configurations,including Basic Settings、 Advanced Settings、 Security、 Access Control、Site Survey、WPS and Status.
  • Page 15 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Auto（DFS）、36、40、44、48、52、56、60 Channel Number 64、100、104、108、112、149、153、157、161 Radio Power(%) 100%、75%、50%、35%、15% This table shows the MAC address、transmission、 reception Associated Clients packet counters and encrypted status for each associated WLAN clients. Table 4: WLAN0 Basic parameters 3.4.1.2 Advanced Settings This page allows the user to configure the advanced settings,including Beacon Interval、Data Rate、Broadcast SSID、Client isolation and Short GI.
  • Page 16 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Format. Figure 3-9: WLAN0 Security Settings Parameter Description Encryption NONE、WEP、WPA2、WPA2 mixed Passphrase(true value ) Pre-Shared Key Format Hex(64 characters) Pre-Shared Key WIFI Password 12345678 (default) Table 5: WLAN0 Security Parameters 3.4.1.4 Access Control This page allows the user to configure WLAN access control,if choose “Allow listed”,only mac address in the table list can connect this AP.
  • Page 17 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-10: WLAN0 Access Control 3.4.1.5 Site Surkey This page provides tool to scan the wireless network. If any Access Point or IBSS is found, user could choose to connect it manually when client mode is enabled.

  • Page 18: Wlan1 （2.4Ghz

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page allows to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let WLAN client automatically synchronize its setting and connect to the Access Point in a minute without any hassle.
  • Page 19 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.4.2.1 Basic Settings This page allows the user to configure the basic settings,including Enable/Disable WLAN interface、Band(work mode)、SSID Name、Channel Width and Show Active WLAN Clients. Figure 3-14: WLAN0 Basic Settings Parameter Description Checked indicates that WLAN1 function is disable.
  • Page 20 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD SSID、Client isolation and Short GI. Figure 3-15: WLAN1 Basic Settings 3.4.2.3 Security This page allows the user to configure the WLAN Security Settings,including Encryption and Pre-Shared Key Format. Website : www.baudcom.com.cn Tel: +86 21 37709251...
  • Page 21 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-16: WLAN1 Security Settings 3.4.2.4 Access Control This page allows the user to configure WLAN access control,if choose “Allow listed”,only mac address in the table list can connect this AP. if choose “Deny listed”,only mac address in the table list can not connect this AP.
  • Page 22 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page provides tool to scan the wireless network. If any Access Point or IBSS is found, user could choose to connect it manually when client mode is enabled. Figure 3-18 : WLAN1 Site Survey 3.4.2.6 WPS...

  • Page 23: Easy Mesh

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page shows the WLAN0 current status, including Band、 SSID Name、 Channel number、 Encryption、BSSID And Associated Clients. Figure 3-19: WLAN1 Status 3.5 WAN 3.4.3 Easy Mesh 3.4.3.1 Easy Mesh Interface Setup This page is used to configure the parameters for Easy Mesh feature of Current Access Point.
  • Page 24 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.4.3.2 Topology This page displays the topology of Easy Mesh network when choose the role as Controller. Figure 3-21:Topology 3.5.1 PON WAN This part allows to configure WAN connections. Users add/delete/modify WAN connections according to local network demand.
  • Page 25 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-22:WAN Settings Parameter Description The interface of WAN connection which system will distribute automatically according to the current wan connections If you want to create a new WAN connection, please select “New Interface Link” and input other WAN Parameters at the same time and then click “Apply Changes”...
  • Page 26 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD via DHCP or set the statics IP. PPPoE mode:ONU works works on Route mode,wan connection get the IP via PPPoE. Enable Bridge Whether enable bridge in Route wan connection Bridge Ethernet(Transparent Bridging) Bridge Mode Bridge PPPoE(implies Bridged Ethernet)

  • Page 27: Services

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Idle Time(sec) The PPP Link maintenance time. Authentication Auto、CHAP、PPP，Usually default choose Auto Mothod This option is not required generally, but if ISP PPPoE Server AC-Name checks the option, you should input according to ISP. This option is not required generally, but if ISP PPPoE Server Service Name checks the option, you should input according to ISP.
  • Page 28 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-23:DHCP Settings 3.6.1.2 Dynamic DNS This page is used to configure the Dynamic DNS address from DynDNS.org or TZO or No-IP. Here users can Add/Remove to configure Dynamic DNS. Figure 3-24:Dynamic DNS 3.6.1.3 IGMP Proxy Website : www.baudcom.com.cn...
  • Page 29 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD IGMP proxy enables the system to deal with IGMP host messages to acts as a proxy for its hosts when users enable it .Enable IGMP proxy on WAN interface (upstream), which connects to a router running IGMP.

  • Page 30: Firewall

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD which you set about Route Protocol to communicate with other devices. Figure 3-27:RIP 3.6.1.6 Samba This page let user to configure Samba function. Figure 3-28:Samba 3.6.2 Firewall This part supports to configurations about IP/Port Filtering、 MAC Filtering、 Port Forwarding 、 URL Blocking 、...
  • Page 31 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.6.2.1 IP/Port Filtering This page allows the user to set the IP/Port filtering function. The rules are based on Source IP Address、 Destination IP range 、Port 、Protocol. Figure 3-29:IP/Port Filtering 3.6.2.2 MAC Filtering This page allows user to set the relevant parameters of the MAC Filtering function,including default actions “Deny”“allow”...
  • Page 32 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-30:MAC Filtering 3.6.2.3 Port Forwarding This page allows user to set the relevant parameters of the Port Forwarding function,Redirect common wan special packets to local device which on the private network behind NAT Firewall.
  • Page 33 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.6.2.4 URL Blocking This page is used to configure the Blocked FQDN(Such as tw.yahoo.com) and filtered keyword. Here you can add/delete FQDN and filtered keyword. Figure 3-32:URL Blocking 3.6.2.5 Domain Blocking This page is used to configure the Blocked domain. Here user can add/delete the blocked domain...

  • Page 34: Voip

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.6.2.6 DMZ This page allows user to set the relevant parameters of the DMZ function,Redirect common wan all packets to local device which on the private network behind NAT Firewall. Figure 3-34:DMZ Settings 3.7 VoIP 3.7.1 VoIP...
  • Page 35 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-34:Port1 Settings 3.7.1.2 Advance Figure 3-35:Advance Settings 3.7.1.3 Tone Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 36 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page is used to configure the Country Tone about Phone,user can select the country according to local areas. Figure 3-36:Tone Settings 3.7.1.4 Other This page is used to configure Dial option、Off-Hook-Alarm、FXS Pulse Dial Detection、SIP setting and SIP options.
  • Page 37 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-38:Network 3.7.1.6 Call History This page shows the current VoIP Call log. Figure 3-39:VOIP Call History 3.7.1.7 Register Status This page shows the register status of POTS. Website : www.baudcom.com.cn Tel: +86 21 37709251...

  • Page 38: Advance

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-40:Register Status 3.8 Advance 3.8.1 Advance 3.8.1.1 ARP Table This page shows the arp table. The list contains the IP address and MAC address which learning from LAN/WAN Interface. Figure 3-41:ARP Table 3.8.1.2 Bridging This page is used to configure the bridge parameters.
  • Page 39 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-42:Bridging 3.8.1.3 Routing This page is used to configure the routing information. Here users can add/delete IP routes. Attention:only user has special network application and then need to set this Route Info Figure 3-43:Routing configuration...

  • Page 40: Ip Qos

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Next Hop The next host ip (gateway) Metric Hop amount Interface WAN or LAN Interface Table 8:Routing Parameters 3.8.1.4 Print Server This page is used to show printer URL(s). Figure 3-44:Print server 3.8.2 IP Qos 3.8.2.1 Qos Policy...

  • Page 41: Ipv6

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.8.2.2 Qos Classification This page is used to add or delete classification rule.(After add a new rule, please click 'Apply Changes' to take effect.) Figure 3-46:QoS Classification 3.8.2.3 Traffic Shaping This page is used to add or delete traffic shaping rule.It will define upstream/downstream traffic rules.
  • Page 42 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page allows the user to enable/disable IPv6 configuration.If IPv6 function is disable,the whole LAN IPv6 cannot be used. Figure 3-48:IPv6 Enable/Disable 3.8.3.2 RADVD This page allows the user to configure RADVD configuration,including Max _Rtr_Adv_Interval、Min _Rtr_Adv_Interval、Adv_Managed_Flag、Adv_Other_Config_Flag.
  • Page 43 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-50:DHCPv6 Settings 3.8.3.4 MLD Proxy This page is used to configure MLD Proxy parameters,including Robust Count、 Query Interval、 Query Response Interval、Response Interval of Last Group Member Figure 3-51:MLD Proxy Configuration 3.8.3.5 MLD Snooping This page is used to enable/disable MLD Snooping.
  • Page 44 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-52:MLD Snooping Configuration 3.8.3.6 IPv6 Routing This page allows the user to configure IPv6 Static Routing information. Figure 3-53:IPv6 Static Routing Configuration 3.8.3.7 IP/Port Filtering This page allows the user to configure IPv6 IP/Port Filtering,including default action、 Protocol、 Src IPv6 address、...

  • Page 45: Diagnostics

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-54:IPv6 IP/Port Configuration 3.8.3.8 IPv6 ACL This page is used to configure the IPV6 Address for Access Control List. If ACL is enabled, only the IP address in the ACL Table can access CPE. Here user can add/delete the IP Address.

  • Page 46: Diagnostics

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This menu allows user to diagnose the current network via Ping and Tracert methods. 3.9.1 Diagnostics 3.9.1.1 Ping This page is used to send ICMP ECHO_REQUEST packets to network host. The diagnostic result will then be displayed.

  • Page 47: Admin

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-59:Traceroute Diagnostics 3.9.1.4 Tracert6 This page is used to print the route packets trace to network host. The diagnostic result will then be displayed. Figure 3-60:Traceroute6 Diagnostics 3.10 Admin 3.10.1 Admin This menu allows user to set the basic function,including Loid/Password、OMCI Information、...
  • Page 48 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD This page allows the user to set GPON LOID/Password and choose OLT mode if device has Compatibility with those brand OLT Figure 3-61:GPON Settings 3.10.1.2 OMCI Information This page allows the user to set Parameters about device information,including Vendor ID 、 CWMP Product Class、...
  • Page 49 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Parameter Description OMCI Vendor ID PON Device Vendor ID OMCI software version 1 Software in the Image A OMCI software version 2 Software in the Image B CWMP Product Class Product Class for TR069 Parameter...
  • Page 50 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-64:Backup/Resetore 3.10.1.5 System Log This page is used to configure System Log,including enable/disable、Log Level、Display Level、Mode and so on. Figure 3-65:System Log Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 51 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.10.1.6 Password This page allows the user to change normal account password.Attention:after factory reset ,the user account would be changed into default account Figure 3-66:Password Configuration 3.10.1.7 Firmware Upgrade This page allows the user to update the software of the device. Click the “Choose File ” button to select the software and then click the “Upgrade”...
  • Page 52 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.10.1.8 ACL This page allows the user to set the access control function, including three access services (TELNET、HTTP、 PING) from LAN and WAN side. User can add the detail IP address to access the device.
  • Page 53 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-69:Time Zone Configuration Parameter Description Current Time The current time of device (1970/1/1 00:00:00) Time Zone Select Choose Time Zone according to local area Enable Daylight Saving Time Enable/disable whether save the current time...
  • Page 54 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 3-70:TR069 Configuration Parameter Description Enable/Disable TR069 Function TR069 Daemon Enable CWMP Parameter Enable/Disable TR069 Parameter (ACS)URL URL about TR069 Server Username which used for authorize TR069 Server (ACS)UserName Password which used for authorize TR069 Server...

  • Page 55: Statistics

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 3.11Statistics 3.11.1 Statistics This menu supports to get the data statistics from LAN/WAN Interface and PON Port. 3.11.1.1 Interface This page allows the user to check the network Interface data statistics. Figure 3-71:Interface Statistics 3.11.1.2 PON Statistics This page allows the user to check PON Interface data statistics.

  • Page 56: Chapter 4 Application Scenario

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Chapter 4 Application scenario 4.1 Requirement ( Internet service with VLAN-100_PPPoE,Voice with Vlan-1830_DHCP) 4.2 Configurations 4.2.1 OLT Configuration In this case, we take Huawei MA5608T for example, to introduce how to configure Internet service with VLAN 100 .Voice service with vlan 1830.

  • Page 57: Onu Webpage Configuration

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD MA5608T(config)#ont-srvprofile gpon profile-id 10 profile-name 4GE+WIFI+1Pots MA5608T(config-gpon-srvprofile-10)#ont-port eth 4 MA5608T(config-gpon-srvprofile-10)#ont-port pots 1 MA5608T(config-gpon-srvprofile-10)#commit (6)Authorize ONT MA5608T(config)#interface gpon 0/1 MA5608T(config-if-gpon-0/1)#port 2 ont-auto-find enable MA5608T(config-if-gpon-0/1)#display ont autofind 2 MA5608T(config-if-gpon-0/1)#ont add 0 1 sn-auth OEMT-0303B9BD omci ont-lineprofile-id 10 ont-srvprofile-id 10...
  • Page 58 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 4-2:Internet service with VLAN-100_PPPoE Figure 4-3:Voice with Vlan-1830_DHCP Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 59 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 4-5:Current wan status (5) After Internet wan and voice wan get the IP address,need to configuration VOIP Server settings. Click VOIP Menu and then input the SIP server and Phone account Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 60 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Figure 4-6:VOIP Settings To Check if VOICE is Working In Status > VOIP it will be Registered Figure 4-7:VOIP Status (6)WLAN Configuration Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 61 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 5G WIFI Settings Figure 4-8:5G WIFI Name Figure 4-9:5G WIFI Password Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...
  • Page 62 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 2.4G WIFI Settings Figure 4-10:2.4G WIFI Name Figure 4.11:2.4G WIFI Password Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...

  • Page 63: Chapter 5 Faq

    SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD Chapter 5 FAQ 1. Why does LED of LAN not light? Reasons: 1) Network cable is damaged or loose connection; 2) Cable type errors; 3) Cable length exceeds the allowable range Solution: 1) Plug the cable tightly;...
  • Page 64 SHANGHAI BAUDCOM COMMUNICATION DEVICE CO.,LTD 2) Central office equipment failure; Solution: 1) Change the power adapter; 2) Reboot the ONU; 3) Contact your operator; Website : www.baudcom.com.cn Tel: +86 21 37709251 Email: info@baudcom.com.cn...

Table of Contents