Buick 2003 Regal Owner's Manual page 112

Turn SignaVMultifunction Lever
0
Turn and Lane-Change Signals
Headlamp High/Low-Beam Changer
0
Flash-to-Pass
0
Windshield Wipers
Windshield Washer
Cruise Control
Turn and Lane-Change Signals
The turn signal has the following positions: two upward
(for right) and two downward (for left). These positions
allow you to signal a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever will return
automatically.
An arrow on the instrument
Dane1 cluster will flash in
I
ihe direction of the
turn or lane change.
To signal a lane change, just raise or lower the lever
until the arrow starts to flash. Hold it there until you
complete your lane change. The lever will return by itself
when you release it.
If the arrow flashes faster than normal as you signal a
turn or a lane change, a signal bulb may be burned
out and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you signal
a turn, check for burned-out bulbs and then check the
fuse. See Fuses and Circuit Breakers
on
page 5-90.
A chime will sound if you leave your turn signal on for
more than 3/4 mile (1.2 km).
3-7