KitchenAid 740-0004 Installation Instructions And Use & Care Manual page 22

5. Reinsert the burner and reattach using the screw and clip
previously removed. Repeat the procedure for each main
burner.
6. Position the igniters so they are ¼" (6.0 mm) away from
each burner.
Record Conversion
The LP appliance nameplate is located on the right flange.
Once converted, place the NG appliance nameplate as close
as possible to the current LP appliance nameplate without
covering it.
In the last page of the Use and Care Guide, write "Converted to
Natural Gas". Also record the conversion date and the
technician/company that performed the conversion.
Adjust High Flame Setting Screw
When converting from LP to Natural gas, you will need to
adjust the high flame setting screw for ideal burner flame
height.
1. Remove each control knob for the main burners.
2. Use a flat-blade screwdriver to turn the high flame
setscrew counterclockwise approximate 90º.
3. Check that burner operates at the new high flame setting.
It may be necessary to adjust the screw setting slightly
more to get the ideal burner flame height.
4. Place the burner control knobs back to their original
positions.
22