PREMIER TECH REWATEC PHT-390 Owner's Manual And Installation Manual

PREMIER TECH REWATEC PHT-390 Owner's Manual And Installation Manual

Advertisement

OWNER'S MANUAL
AND INSTALLATION GUIDE
Holding tanks
Made in
Canada

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REWATEC PHT-390 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for PREMIER TECH REWATEC PHT-390

  • Page 1 OWNER’S MANUAL AND INSTALLATION GUIDE Holding tanks Made in Canada...
  • Page 2: Technical Data

    Installation guide and Owner’s manual – Holding tanks This guide provides information regarding the installation, operation, maintenance and warranty of the Holding tank from Premier Tech. For additional information, contact our Customer Service at 1-800-632-6356. 1. Technical data MATERIAL Medium-density polyethylene (MDPE) plastic CERTIFICATION BNQ (Québec Standards Bureau) NQ 3682-901/2008...
  • Page 3 2. Sizing and Location For residential systems, determine the size of the holding tank required according to the number of bedrooms in the residence. To determine which tank is required, refer to the regulations or standards that apply in your region, state, province or country (the same applies for the installation).
  • Page 4: Installation Procedure

    4. Components of the Holding Tank At delivery, make sure that all the following components are included: 1 polyethylene tank; 1 inlet device; C. 1 lid attached to the access hole with lag screws; D. 1 polypropylene rope attached on the top of the holding tank for handling purposes;...
  • Page 5 Table showing the load of the holding tank’s anchoring system Tank model Resistance/Strap Total weight of concrete PHT-390 1,000 kg 3,400 kg PHT-660 1,000 kg 5,700 kg Note: Use only non-corrosive materials. Rope for handling Step 2b – Bedding preparation and tank placing •...
  • Page 6: Maintenance

    7.4 Winter closing your residence If you close your residence (i.e. close the circuit-breaker) during winter where freezing is more likely, you must contact Premier Tech’s After-Sales Service Department to get help establish the appropriate procedure. In doing so, you will ensure a longer life for your holding tank.
  • Page 7 (hereinafter called "Subsequent Purchaser(s)"), according If the installation is not performed by an installer trained by Premier Tech or if the to the provisions of section 8 of this warranty. "Successor(s)" shall mean any other Customer carries out or causes to be carried out repairs, or attempts to repair or person entitled to exercise the Customer’s rights under the law.

This manual is also suitable for:

Rewatec pht-660

Table of Contents