Table of Contents
Advertisement
If this label is o n the lap-shoulder belt, your vehicle has
Lap-Shoulder Belt System A. Read 1-35 through 1-37 to
see how to secure a child restraint properly. If the label
isn't on the lap-shoulder belt, your vehicle has
Lap-Shoulder Belt System
B.
Read 1-37 and
1-38
to see
how to secure a child restraint properly.
Lap-Shoulder Belt System A
You'll be using the lap-shoulder belt. See the earlier part
about the top strap if the child restraint has one.
You'll need a safety locking clip to properly secure a
child restraint in this position. You can get a locking clip
where child restraints are sold, or from your Buick
dealer (GM Part Number 94844571). The locking clip
must be the same as the one shown here.
Until you have this clip, secure a child restraint only in a
seat that has a separate lap belt (and a way to anchor a
top strap, if the child restraint has one). See the
following part about securing a child restraint in a center
position. Once you have the clip, follow these
instructions:
1.
2.
3.
4.
Put the restraint on the seat. Follow the instructions
for the child restraint.
Secure the child in the child restraint as the
instructions say.
Pick up the latch plate, and run the lap and shoulder
portions of the vehicle's safety belt through or
around the restraint. The child restraint instructions
will show you how. Tilt the latch plate to adjust the
belt if needed.
If the shoulder belt goes in front of the child's face or
neck, put it behind the child restraint.
Buckle the belt. Make sure the release button is
positioned so you would be able to unbuckle the
safety belt quickly if you ever had to.
1-34
Advertisement
Table of Contents
