PASCO ME-6957 Product Manual

These axles are a replacement for the
axles found on ME-9430 Plunger Cart
(ME-9430), Collision Cart (ME-9454), PAScar
(ME-6950), and GOcar (ME-6951).
Note: Note: Replacement of axles on a
Smart Cart (ME-1240 and ME-1241) can
only be performed by a qualified PASCO
technician.
What's Included What' s Included
• 4× Replacement Axles
Plunger Cart and Collision Car Plunger Car t and Collision Cart t
Axle Axle Replacement Replacement
CAUTION: CAUTION:
Replacement of axles on a legacy cart (see figure) can
result in injury and should only be performed by a
qualified PASCO technician. It is highly recommended
that the cart be sent to PASCO for axle replacement.
CAUTION: Edges on metal surfaces may cut the CAUTION:
skin. Wear leather gloves.
CAUTION: Cart springs may eject suddenly when CAUTION:
disassembling the cart. Wear safety goggles.
©2021 PASCO scientific
Car Cart Replacement Axles t Replacement Axles
ME-6957
1. Using a #1 Phillips head screwdriver, loosen the
screws from one end cap and remove the end cap
from the cart.
Note: Note: The screws are thread-forming screws
and may require substantial force to remove and
reinstall.
2. Place the cart on a table with the wheels facing
upward.
3. Use a block to push down the wheels so that they
are flush with the bottom of the cart.
Product Guide
012-16990A
www.pasco.com