PASCO ME-9454 Instruction Manual

4.
8.
9.
2.

Features

1
Low-friction Retractable Ball-Bearing Wheels
2 ABS End Caps
3
Magnets in both end caps (not shown)
Upper Tie Point (each end cap)
4
Slot for Cart Picket Fence (ME-9804)
5

Accessories

Please see the PASCO catalog or the PASCO web site at
www.pasco.com
for information about accessories such as tracks, springs,
bumpers, pulleys, masses, and special attachments that
are designed to be used with the Collision Cart.
800-772-8700
Collision Cart
6.
5.
ME-9454
7.
1.
6 Two Mounting Holes
7 Accessory Tray
8 Hook and Loop (Velcro®) Tabs (each end cap)
9 Lower Tie Point (each end cap)

Introduction

The Collision Cart is a 500 gram cart with an aluminum
body and ABS (acrylonitrile butadiene styrene) end caps. It
has two magnets in each end cap. It also has
"hook-and-loop" (Velcro®) tabs on each end cap for inelas-
tic collision studies. The magnets can be used for elastic
collisions studies. Both ends of the Collision Cart have con-
venient tie points at the top and the bottom. On the top of
the Collision Cart is an accessory tray that can hold extra
masses. The tray has threaded holes for attaching PASCO
accessories such as a Cart Adapter that can be used to
Instruction Manual
012-14782A
5.
4.
2.
www.pasco.com
3.