Matco Tools HG300A Quick Start Manual

WARNING
Study, understand and follow all instructions provided with this
product. Read these instructions carefully before installing, operating,
servicing, or repairing this tool. Keep these instructions in a safe,
accessible place.
INTENDED USE OF THE TOOL
This heat gun was designed to be used for stripping paint, removing
decals and pin striping, soften adhesives, drying, thawing, forming
and welding plastics and more. Do not use this tool outside of the
designed intent. Never modify the tools for any other purpose or use.
BEFORE USE
Before use, READ AND UNDERSTAND THE WARNINGS ON PAGE 1
and check the parts diagram and part number listing on page 4-5 to
make sure all parts are included. If any parts are missing or damaged,
please call your distributor.
Caution: To help prevent personal injury
Normal use of this product is likely to expose the user to dust and/or
microscopic particles containing chemicals known to the State of
California to cause cancer, birth defects or other reproductive harm.
Always wear appropriate safety equipment and clothing when
using this product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all warnings
and operating instructions may result in damages and serious
injury or death.
(Users and bystanders).
it was designed.
the tool, or use of the tool with accessories not designed for it could
result in serious injury or death.
for the job that you are attempting to perform.
equipped area.
immediately and don't use it again.
(danger of explosion).
away and inaccessible to children.
and before storing let it cool down completely.
www.matcotools.com
ULTRA HEAT GUN
1 YEAR LIMITED WARRANTY
The manufacturer warrants this product to the original user against
defective material or workmanship for a period of 1 year from the
date of purchase.
The manufacturer reserves the right to determine whether the part
or parts failed because of defective material, workmanship or other
causes. Failures caused by accident, alteration or misuse are not
covered by this warranty.
The manufacturer, at its discretion, will repair or replace product
covered under this warranty free of charge. Repairs or replacements
of products covered under this warranty are warrantied for the
remainder of the original warranty period.
The manufacturer or its authorized service representatives must
perform all warranty repairs. Any repair to the product by
unauthorized service representatives voids this warranty. The rights
under this warranty are limited to the original user and may not be
transferred to subsequent owners.
The warranty is in lieu of all other warranties, expressed or implied,
including warranties of merchantability and fitness for a particular
purpose. Some states do not allow the exclusion or limitations of
incidental or consequential damages, so the above limitations may
not apply to you.
Made in China
to Matco specifications
Ergonomic design. Temperature is adjusted with rear dial
Everything you need. Kit includes 5 accessories for scraping,
paint and adhesive removal, wiring and more.
design
Powerful performance. Up to 1,500W of power for an adjustable
Specification:
Voltage & Frequency: 120V~60Hz
Rate Power: 1,500W(MAX)
Adjustable Temperature: 100-1,000°F
Adjustable Air Flow: 10 or 20 CFM
for low (10 CFM) or high (20 CFM).
2. Adjust temperature with rear mounted dial. Note that the
12 o'clock position is the setting (see arrow on gun body).
Thus, turn clockwise to increase temperature.
DO NOT DISCARD – GIVE TO USER
Page 1
PRODUCT INFORMATION
OPERATION
HG300A
1706217-14