Table of Contents
Advertisement
8
www.aeg.com
2. Press the temperature regulation
button again to change the
temperature.
3. Press the OK button to confirm.
The temperature indicator shows the set
temperature.
The set temperature will be reached
within 24 hours.
After a long period of non-operation it is
not necessary to set the temperature
again because it remains stored.
4.6 High temperature alarm
An increase in the temperature (for
example due to a power failure) is
indicated by flashing of the alarm and
temperature indicators, and sounding of
the buzzer.
The highest temperature reached in the
compartment appears on the indicator
for a few seconds. Then the display
shows the set temperature again.
The alarm indicator continues to flash
until normal conditions are restored.
To reset the alarm press OK button. The
buzzer will switch off.
4.7 FROSTMATIC function
The FROSTMATIC function accelerates
the freezing of fresh food and, at the
same time, protects foodstuffs already
stored from undesirable warming.
Activate the FROSTMATIC function at
least 24 hours before placing the food to
be frozen in the freezer compartment.
1. To activate the FROSTMATIC
function, press the Mode button
(several times if necessary) until the
corresponding icon appears
2. Confirm the choice by pressing the
OK button within few seconds.
You will hear the buzzer and the
remain on the display.
This function stops automatically after 52
hours.
It is possible to deactivate the function at
any time by pressing the Mode button
until the corresponding icon will flash
and then the OK button.
4.8 ChildLock function
1. The Child Lock function is activated
by pressing the Mode button (several
times if necessary).
The corresponding icon appears
2. Confirm the choice by pressing the
OK button within a few seconds.
You will hear the buzzer and the icon
remains lighted. In this condition any
possible operation through the keys
does not cause any change as long as
this function is activated.
It is possible to de-activate the function
at any time by pressing the Mode button
until the corresponding icon will flash
and then the OK button.
4.9 DrinksChill function
The DrinksChill function is to be used as
a safety warning when placing bottles in
the freezer compartment.
1. Activate by pressing the Mode
button (several times if necessary)
until the corresponding icon appears
.
2. Confirm the choice by pressing the
OK button within a few seconds.
You will hear the buzzer and the icon
appears.
3. Press the Temperature regulation
button to change the timer value
from default 30 min.
The timer can be changed from 1 to
90 min.
At the end of the selected time there are
the following indications:
• on the indicator
flashing;
• the icon
.
• the icon
• sounding of an acoustic alarm until
the OK button is pressed.
will
At this point bear in mind to remove the
drinks contained in the freezer
compartment.
It is possible to deactivate the function at
any time by pressing the Mode button
until the corresponding icon will flash
and then the OK button.
the symbol
flashing;
flashing;
.
Advertisement
Table of Contents
