Drive-Off Assistant - BMW 2011 7 Series Owner's Manual

Table of Contents

Advertisement

Activating NORMAL
Press the button repeatedly until the
program display in the tachometer
goes out.
In certain situations, the system automatically
changes to the NORMAL program,
program change, refer to page
COMFORT*
Comfort-oriented tuning of the shock absorbers
for optimal traveling comfort with maximum
driving stabilization.
Activating COMFORT
Press the button repeatedly until COM‐
FORT appears in the tachometer.
Displays in the instrument cluster
Selected program
The selected program is dis‐
played in the tachometer.
Program selection
Pressing the button displays a list of the select‐
able programs.
Display on the Control Display
Program changes can be displayed briefly on
the Control Display.
To do so, make the following settings:
1.
"Settings"
Online Edition for Part no. 01 41 2 603 958 - 03 10 500
2.
automatic
105.
3.

Drive-off assistant

This system supports driving away on gradients.
The parking brake is not required.
1.
2.
After the foot brake is released, the vehicle is
held in place for approx. 2 seconds.
Depending on the vehicle load, the vehicle may
roll back slightly.
without delay, since the drive-off assistant will
not hold the vehicle in place for more than ap‐
prox. 2 seconds and the vehicle will begin rolling
back.◀
"Control display"
"Display driving settings"
Hold the vehicle in place with the foot brake.
Release the foot brake and drive away with‐
out delay.
Driving off without delay
After releasing the foot brake, start driving
107

Advertisement

Table of Contents
loading

This manual is also suitable for:

Activehybrid 72011 activehybrid 72011 activehybrid 7 l

Table of Contents