Installation - Rainford RBН-4654 BF User Manual

device (mechanical extractor hood)
Prolonged intensive use of the appliance may call for additional ventilation, for example opening
of a window or more effective ventilation, for exrample increasing the level of mechanical
ventilation where present.
Need to do when there is gas odor
 Turn off all valves on the gas products and gas meters.
 Do not use naked flames or smoke.
 Do not operate any electrical switch. (Eg lamp switch or the door bell)
 Open the doors and windows.
 Check all pipes and connections to leak or not. Still getting the smell of gas, exit the
house.
Safety about Electrical Studies
 Any work done on electrical equipment and systems, performed by competent and
qualified persons.
 Turn off and disconnect it from the product in case of any damage. To do this, turn off
your home insurance.
 Make sure it is compatible fuse current with product current.

INSTALLATION

This appliance shall be installed in accordance with the regulations in force and only used in a
well ventilated location. Read the instructions before installing or using this appliance.
WARNING:
Prior to installation, ensure that the local distribution conditions (nature of the
gas and gas pressure) and the adjustment of the appliance are compatible.
WARNING:
The adjustment conditions for this appliance are stated on the label (or data
plate).
Installation should be carried out according to the instructions by a professionally qualified
person. The manufacturer will not accept responsibility for any damage to persons, animals or
things due to wrong installation.
ENVIRONMENTAL WARNING: I
packaging materials, showingthe importance of safety and environmental
conditions need to throw it away. According tothe properties for re-use of
waste packaging (foil, cardboard, styrofoam, etc.) Before throwing away the
product by cutting the power cord is not used for children are not exposed
to danger and drape.
Installation Instructions
 For installation the appliance must be connected in accordance with all local electrical
regulations.
 Be sure to the gas and/or electrical installation is appropriate before calling the authorized
service provider of to make the product ready for use. If it is not, necessary arrangements
must be done by calling a licensed electrician or plumber. Then, call a qualified service.
f the device after installation,
7