Transferring Music - Sony Walkman NW-S703F Quick Start Manual

Transferring Music

Connect the player to your computer and transfer the audio data to the player.
The player's battery is recharged while connected to a computer.
When the remaining battery indication of the display shows
When you use the player for the first time, or if you have not used the player for a long
time, recharge it fully, and then transfer the data to the player.
For information on recharging time, see the Specification of the Operation Guide (PDF
file).
1
USB cable
(supplied)
, charging is complete.
For details, refer to SonicStage Help
1
Double-click the icon on the desktop.
SonicStage starts up.
2
Connect the player to your computer with the supplied USB cable.

Place the pointer over [Transfer] and select [ATRAC Audio Device] from
the transfer destination list.

Select an audio file(s) or album you want to transfer.

Click to start transferring.
To stop transferring, click .
Notes
 Do not disconnect the USB cable while data is being transferred.
 Do not leave the player connected for extended periods to a laptop computer that is not
connected to AC power, because the player may discharge the computer's battery.
 Hints
 You can create and transfer playlists that group your favorite songs into a list. Select the playlist
in the SonicStage display mode to transfer playlists.
 To delete songs on the player, transfer songs back to SonicStage or delete them in SonicStage.
1