VPT300 Intelligent Camera
Product Overview
6.1 Maintenance Using the Web Interface
The VPT300 and its VPC600s can be maintained by the web interface of the TE40/TE50/
TE60/TX50 endpoint of V600R006C00 or later. The web interface allows you to:
l
l
l
l
l
l
l
6.2 Remote Maintenance Using Command Lines
You can use Telnet/SSH command lines to:
l
l
l
6.3 Log Management
User operations and system events are logged, which help engineers maintain the VPT300
and locate faults. Logs are saved as files.
Users can log in to the VPT300 by Telnet or SSH and run specific commands to query all or
some log records. However, VPT300 logs cannot be queried or exported from the web
interface of the TE40/TE50/TE60/TX50 endpoint.
Logs are classified into system logs and user logs, which have three levels: information,
alarm, and error.
Issue 02 (2017-04-10)
6
Operation and Maintenance
Export configuration data of the VPT300 with just one click.
Save and change the VPT300's upgrade password.
Specify the sensitivity of speaker tracking, which can be: low, medium (default), or high.
Set video parameters.
Configure the tracking mode, including automatic, AutoFrame, and manual.
Enable or disable PiP and specify the position of the small window.
Set the IP address, subnet mask, and gateway address of the VPT300.
Query the VPT300 and VPC600 version numbers, serial numbers, and electronic labels.
Restart the VPT300.
Specify the sensitivity of speaker tracking.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 Operation and Maintenance
12