Page 1
The RFID Duplicator User Manual Model – KF-001 Copyright Tiny Labs Inc. 2017...
Page 2
1. Press and release the previously programmed button, the LED will flash green to indicate a valid ID is stored. 2. Hold Keysy in front of the RFID reader. The reader should beep or blink indicating a valid ID has been read. That's it! Copying a previously read ID onto a Keysy rewritable keyfob: 1.
Page 3
Technical Specifications Operating Frequency 125kHz Working Temperature -30° - +60° C Warning Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.