keysy KF-001 Instructions
  1. Manuals
  2. Brands
  3. keysy Manuals
  4. Remote Control
  5. KF-001
  6. Instructions

keysy KF-001 Instructions

Hide thumbs
1
2

Advertisement

Table of Contents

Copy. Consolidate. Simplify.
INSTRUCTIONS
Model KF-001
Keysy
remote
Programming the
Keysy remote
1. Place the Keysy remote on top of the
keycard/keyfob you wish to copy.
2. Press and hold the button you wish to
program for 6 seconds until the LED on
the Keysy remote blinks red. Release the
button and center the blinking LED on
the keycard/keyfob.
3. If the LED turns GREEN you can now
use Keysy remote as the keycard/keyfob
or follow the How to make a duplicate
section.
www.tinylabs.io/keysy
GYM
HOME
4-BUttON Rfid REMOtE CONtROl
REPLACE THESE FOBS
WITH ONE DEVICE
For use with most
125kHz RFID systems
Rewritable
keyfob
4. If the LED turned AMBER flip the
keycard/keyfob and repeat steps 1-3.
5. If programming continues to fail
(AMBER) move the Keysy remote to a
different location on the keycard/keyfob
and repeat steps 1-3.
6. If programming continues to fail after
multiple attempts the card may not
be supported. Please contact
support@tinylabs.io to troubleshoot.
Using the Keysy remote
as keycard/keyfob
1. To select the desired electronic key
press and release the previously
programmed button.
2. Hold the Keysy remote parallel to the
RFID reader (within a few centimeters).
The RFID reader should blink and/
or beep when the electronic key has
successfully been read.
3. If the Keysy remote fails to open the
door see the section Keysy Remote
Compatibility.
GARAGE
WORK
Rfid reader
not included
continued....

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KF-001 and is the answer not in the manual?

Questions and answers

Related Manuals for keysy KF-001

Summary of Contents for keysy KF-001

  • Page 1 4. If the LED turned AMBER flip the keycard/keyfob and repeat steps 1-3. Keysy remote 5. If programming continues to fail 1. Place the Keysy remote on top of the (AMBER) move the Keysy remote to a keycard/keyfob you wish to copy. different location on the keycard/keyfob and repeat steps 1-3.

  • Page 2: Battery Replacement

    Due to inconsistencies between manufacturers, of the terms set forth below: Keysy remote does not work on every RFID The Keysy™ RFID Duplicator is intended as a tool to reader. In the case where Keysy remote does conveniently store multiple radio frequency identification not work with a specific RFID reader it can still (RFID) keys for later recall and use.

Table of Contents