Advertisement
Table of Contents
- 1 Table of Contents
- 2 Installation
- 3 Connecting the Camera to System
- 4 Download Search Tool and Change IP Address
- 5 Accessing Via Web Browser
- 6 Accessing Via Client Software
- 7 Working with Onvif NVR
- 8 Add Camera to Blue Iris
- 9 Operating Via Danale Mobile App
- 10 Frequently Asked Questions
- Download this manual
Advertisement
Table of Contents
Related Manuals for Alptop Security POE Camera Series
Summary of Contents for Alptop Security POE Camera Series
- Page 1 ALPTOP AT-800B(Z) AT-800D(Z) AT-500PE(20) AT-4K30P POE Camera Series User's Manual www.alptopsecurity.com support@alptopsecurity.com...
-
Page 2: Table Of Contents
www.alptopsecurity.com support@alptopsecurity.com Table of Content Page 1.Installation 03-04 2.Connecting the camera to system 05-05 3.Download Search Tool and change IP address 06-07 4.Accessing via Web Browser 08-11 5.Accessing via Client Software 12-14 6.Working with Onvif NVR 15-16 7.Add camera to Blue Iris 17-17 8.Operating via Danale Mobile App 18-24... -
Page 3: Installation
www.alptopsecurity.com support@alptopsecurity.com 1.Installation... - Page 4 www.alptopsecurity.com support@alptopsecurity.com 1.Installation...
-
Page 5: Connecting The Camera To System
www.alptopsecurity.com support@alptopsecurity.com 2.Connecting the camera to system Note: 1.This camera works with ONVIF standard PoE NVR or PoE Switch with 48V-54V power supply, insuffcient power supply will result in no picture. 2.The camera should be connected to an optional DC 12V power supply if you do not use PoE (Power over Ethernet). -
Page 6: Download Search Tool And Change Ip Address
www.alptopsecurity.com support@alptopsecurity.com 3.Download Search Tool and change IP address Most cameras come with DHCP reservations.You can also set cameras with static IP address via search tool. Note:Some model (AT-800DZ) has the same default IP address after leaving the factory. Default IP address: 192.168.0.123, Username: admin, Password: 123456 3.1 Download Search Tool and get camera ip address Visit our website www.alptopsecurity.com Click “SUPPORT”... - Page 7 www.alptopsecurity.com support@alptopsecurity.com 3.Download Search Tool and change IP address 3.2 Restore to Factory Setting Please tick the camera you need and click ”Batch Reset” 3.3 Revise camera IP address Please tick the camera you need,click “IP Batch Setting”, You can enable DHCP or revise camera ip address directly.Please make sure that the camera and computer addresses are in the same network segment.
-
Page 8: Accessing Via Web Browser
www.alptopsecurity.com support@alptopsecurity.com 4.Accessing via Web Browser 4.1 The camera support IE, Firefox Google Chrome and Safari. 1.Open the browser. 2.In the browser address bar, input the IP address of the network camera, and press the Enter key to enter the login interface. 3.Input the user name(admin) and password(123456) 4.Select the English language from the drop down menu,Click Login 5.Install the plug-in before viewing the live video and managing the camera. - Page 9 www.alptopsecurity.com support@alptopsecurity.com 4.Accessing via Web Browser If there is a delay in video response when accessing remotely, please switch to Sub Stream instead. 4.2 General Configurations 1) To modify the camera Title name and Time & Date Configuration > Camera > Image > OSD > Title Message Configuration >...
- Page 10 www.alptopsecurity.com support@alptopsecurity.com 4.Accessing via Web Browser a. Select your Time Zone, and click PC Sync. Set up your DST (Daylight Savings Time) if needed , click Save. (Time and date will reset to 2000-01-01 if camera restarts) b. If the camera is connected to the Internet, you can set up a NTP server for the camera to sync the time and date automatically.
- Page 11 www.alptopsecurity.com support@alptopsecurity.com 4.Accessing via Web Browser Using the P2P Cloud ID and QR code, you can access the camera remotely anywhere via smart phone with Internet access. Please register an account via mobile phone after installing the Danale APP from Apple Store or Google Play Market, then login and add your camera to start previewing.
- Page 12 www.alptopsecurity.com support@alptopsecurity.com 5.Accessing via Local Client Software LMS Client is installed for Local viewing under LAN network. 5.1 PC software- LMS Software Client (only support Windows PC) Visit our website: www.alptopsecurity.com,go to Support>Download>AT-200D/800D(Z),AT- 200PE/500PE-POE Series” >Software>LMS local client_windows.zip (Note: Please don’t install Client Software on C drive, not support for Macintosh system) Input user name(admin) and password (123456) to log in.
-
Page 13: Accessing Via Client Software
www.alptopsecurity.com support@alptopsecurity.com 5.Accessing via Client Software 2) Manually add Click “Add” button,You can manually add devices, including name, IP, video port, PTZ control port, grouping, account, and password (default setting: admin, 123456) for editing. Required field. 5.3 Record Plan The corresponding video recording plans can be customized in batches or individually, including timed recordings, motion detection recordings, alarm recordings, and clearing recordings. - Page 14 www.alptopsecurity.com support@alptopsecurity.com 5.Accessing via Client Software 5.4 PTZ control interface Back to liveview,click the arrow as below, PTZ control box will pop up...
-
Page 15: Working With Onvif Nvr
www.alptopsecurity.com support@alptopsecurity.com 6.Working with Onvif NVR The IP camera supports standard ONVIF protocol and it can be added to third-party video recorder. 6.1 Before pairing cameras to the NVR, make sure the NVR and cameras have valid and matching IP scheme. Note: Some of the PoE NVR supports Plug &... - Page 16 www.alptopsecurity.com support@alptopsecurity.com 6.Working with Onvif NVR 6.3.Modify IP address Notice: The IP address of the camera must be in the same subnet of your NVR. Please refer to the NVR user manual of your NVR to confirm the IP address Subnet. 6.4 Resolution of Camera ►The recording resolution of NVR must be compatible with the resolution of camera.
-
Page 17: Add Camera To Blue Iris
www.alptopsecurity.com support@alptopsecurity.com 7.Add camera to Blue Iris Use “http” and find camera within Lan network. Note:The password is the camera's login password, if you change camera password,here password must be consistent. -
Page 18: Operating Via Danale Mobile App
www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App Danale is an application for mobile devices. With the App, you can view live image of the camera, receive alarm notification. You can open Cloud Service to store motion detection videos and 7/24 videos. - Page 19 www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App 8.1 Add camera to Danale App. Click button and turn on GPS positioning to get the WiFi name, Input wifi password. Click the eye icon to double confirm the password you entered correct.Please be careful not to leave spaces.Please also ensure your phone and camera connected under the same wifi.Click ”next”...
- Page 20 www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App Note: Please make sure P2P is enable. Log into web browser and go to configuration - network - P2P to check. 8.2 Main screen menu introduction...
- Page 21 www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App 8.3 Settings Click on the phone preview screen,And click button to enter the settings of the camera. 8.3.1 Security Setting: 1.Motion detection: Activate motion detection and alarm notification, sensitivity is adjustable 2.Sound detection: Optional. Please check the product details. 8.3.2 Device Settings Network Setting: 1.WiFi Setting:Please ignore since this camera does not support WiFi.
- Page 22 www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App How to play back the recordings 8.4.1 Playback the recordings in the SD card Click the playback icon. Select “Device” to play back the recordings. You can choose the date and drag the recording progress bar below for your selective playback. if the camera not detect the SD card, Please remove the SD card, restart the camera and insert the SD card into the camera again.
- Page 23 www.alptopsecurity.com support@alptopsecurity.com 8.4.2 Playback the recordings in the cloud storage,Click the playback icon.Select “Cloud REC” to play back the recordings. You can choose the date and drag the recording progress bar below for your selective playback.You need purchase cloud service first. 8.4.3 Check the motion detection recordings,Click the information icon.Click the corresponding motion detection information to watch the video.
- Page 24 www.alptopsecurity.com support@alptopsecurity.com 8.Operating via Danale Mobile App 8.5 Sharing Camera Please share your camera if your family member want to add this camera. Your family members or friends need to download the app and you need to know their user ID. As shown in the figure below, 15118171107 is the user ID.
-
Page 25: Frequently Asked Questions
www.alptopsecurity.com support@alptopsecurity.com 9.Frequently Asked Questions 1. Why can’t I open the default IP address 192.168.0.123 via web browser? The default IP address may not match your LAN’s IP scheme. Check your computer’s IP address before accessing the camera. If the IP address does not match the 192.168.0.x scheme, please install the IP search tool from the CD to modify the camera’s IP address. - Page 26 www.alptopsecurity.com support@alptopsecurity.com 9.Frequently Asked Questions 7. Where can i control the motorized auto focus lens zoom? 1) Using the camera’s web interface; 2) Control by PC client software; 3) Roll the mouse wheel at the search tool preview window; 4) Find the PTZ menu in your NVR to control lens zoom 8.No found devices after inputing WiFi password or can not view this camera with danale app? 1.Log in to Internet Explorer and go to Configuration - Network - P2P to enable it.
Need help?
Do you have a question about the POE Camera Series and is the answer not in the manual?
Questions and answers
where is the microphone. Its getting too much wind I need to install a wind filter. camera model at-4k30p