Table of Contents
Advertisement
Storing a station
Via iDrive
1.
"Radio"
2.
"FM"or"AM"
3.
Select the desired station.
4.
Press the controller again.
5.
Select the desired memory location.
The station is stored.
The stations are stored for the remote control
currently in use.
Via programmable memory keys
You can store a station on the programmable
memory keys, refer to page 21.
1.
Select the desired station.
2.
...
Press the desired button
for a longer period.
Radio Data System RDS
On the FM waveband, additional information is
broadcast via RDS. If the reception conditions
are good, the station names are shown on the
Control Display. Where reception is poor or in
the event of interference, it may take some time
before the station names will appear in the
display.
Switching RDS on/off*
1.
"Radio"
2.
"FM"
3.
Open "Options".
142
Online Edition for Part no. 01 41 2 602 116 - © 01/09 BMW AG
4.
"RDS"
The setting is stored for the remote control cur-
rently in use.
HD radio*
Many stations broadcast both analog and digi-
tal signals. If a digital radio network is available,
these stations can be received digitally and thus
with better sound quality.
License conditions
HD Radio™ technology manufactured under
license from iBiquity Digital Corp. U.S. and For-
eign Patents. HD Radio™ and the HD and HD
Radio logos are proprietary trademarks of
iBiquity Digital Corp.
Switching digital radio reception on/off
iDrive, for operating principle refer to page 16.
1.
"Radio"
2.
"FM"or"AM"
3.
Open "Options".
4.
"HD radio"
The setting is stored for the remote control cur-
rently in use.
This symbol is displayed when a station is
received digitally.
In areas in which the station is not continuously
received in digital mode,
the playback switches between analog and dig-
ital reception. Due to time delayed broadcast-
ing, there may be repetitions or interruptions. In
this case, switch off digital radio reception.
Advertisement
Table of Contents
