Rear Window Defroster; Switching Cooling Function On And Off Manually - BMW 2006 7 Series Owner's Manual

The interior temperature, air volume, and air
distribution can be set starting from the radio
ready state.
Switching cooling function on and off
manually
When activated, the air conditioner
mode cools and dehumidifies the
incoming air, reheating it as
required, depending on the temperature set-
ting. Depending on the weather, the windshield
may fog over briefly when the engine is started.
The cooling function is switched on automati-
cally with the AUTO program. The passenger
compartment can only be cooled with the
engine running.

Rear window defroster

The rear window defroster
switches off automatically after a
while.
Front ventilation
1 Knurled wheels for smoothly opening and
closing the air vents
2 Knurled wheels for changing airflow direc-
tion
Ventilation for cooling
Adjust the vents to direct the flow of cool air in
your direction, for instance, if the interior has
become too warm, etc.
Draft-free ventilation
Set the vent outlets so that the air flows past
you and is not directed straight at you.
Online Edition for Part No. 01 41 0 012 254 - © 02/06 BMW AG
Ventilation in rear
1 Knurled wheel for smoothly opening and
closing the air vents
1
Knurled wheels for smoothly opening and
closing the air vents
2 Levers for changing airflow direction
*
3 Knurled wheels for setting temperature:
> Turn toward blue: colder
> Turn toward red: warmer
Microfilter/activated-charcoal filter
The microfilter removes dust and pollen from
the incoming air. The activated-charcoal filter
provides additional protection by filtering gas-
eous pollutants from the outside air. Your BMW
center replaces this combined filter as a stan-
dard part of your scheduled maintenance.
You can select a display of more detailed infor-
mation in the service required display, refer to
page 78.
107