ECS Electronics CR-066-BHU Manual

Jeep Grand Cherokee 05/2013 >>
Jeep Grand Cherokee 2016 >>
• Fitting instructions electric wiring kit tow bar with 12-N socket up to DIN/ISO Norm
1724.
• We would expressly point out that assembly not carried out properly by a competent
installer will resultin cancellation of any right to damage compensation, in particular
those arising by virtue of the product liability act.
• Contents of these kits and their fitting manuals are subject to alteration without
notice, please ensure that these instructions are read and fully understood before
commencing installation.
• Do not overload circuits; the maximum loads per connection are detailed in this
manual.
• Attention! Before Installation, please read
this manual carefully and inform your customer
to consult the vehicle owners manual to check
for any vehicle modifications required before towing.
• In the event of functional problems,
troubleshooting must be limited to about 0.5 hours,
contact the technical support:
ukts@ecs-electronics.com / 07440 202 052.
© ECS Electronics B.V.
Partnr.: CR-066-BHU
Revision: 2 Page 1 CR-066-BHU / 171220TT