Sony FWD-50PX2 Operating Instructions Manual page 97

Problem
The remote control does not
7
work.
The power button and control
8
buttons on the display do not
work.
Neither the remote control nor a
9
Control S connection can be used
to toggle between RGB and YUV
(component), or between VIDEO
(component video) and S-VIDEO
(Y/C).
Cause
In the remote control settings, the
"Control Mode" is set to "Display Unit
Only".
A cable is connected to the
CONTROL S IN connector.
The batteries in the remote control are
drained.
Something is blocking the remote
control signal detector on the display.
(If the input signal does not toggle
after pressing the INPUT2, OPTION1,
or OPTION2 button at least two times)
the "Input Setting" for the selected
input is set to "Fix".
In the remote control settings, the
"Control Mode" is set to "Remote
Only".
The "Input Setting" for the selected
input is set to "Fix".
Remedy
Using the control buttons on the top of
the display, check the setting by opening
the main menu and then selecting
"CUSTOM SETUP" t "Remote" t
"Control Mode".
For details on the "Control Mode", see
"Control Mode" on page 19 (GB).
Check the condition of the CONTROL S
IN connector.
The remote control cannot be used while
the display is controlled via a Control S
connection.
Try operating the display by pressing the
power button and control buttons on the
top of the display.
Also, check the condition of the batteries
in the remote control.
Make sure nothing is blocking the
detector.
If you want the input signal to toggle with
each press of the button, set the "Input
Setting" to "Selectable".
For details on the "Input Setting", see
"Input Setting" on page 19 (GB).
Check the setting by opening the main
menu with the remote control and then
selecting "CUSTOM SETUP" t
"Remote" t "Control Mode".
For details on the "Control Mode", see
"Control Mode" on page 19 (GB).
If you want the input signal to toggle with
each press of the button, set the "Input
Setting" to "Selectable".
For details on the "Input Setting", see
"Input Setting" on page 19 (GB).
Troubleshooting
47
(GB)