Caution - Sony FWD-50PX2 Operating Instructions Manual

Caution

Provide an ample amount of space
around the display
• To prevent internal heat buildup from sealing off the
display, make sure to ensure proper ventilation by
leaving open the minimum amount of space around
the display, as illustrated below.
• The ambient temperature must be 0 °C to +35 °C
(32 °F to 95 °F).
• When installing the display horizontally, use the
display stand SU-50FW (not supplied) as a stand.
• Regarding the installation of hardware such as
brackets, screws, or bolts, we cannot specify the
products. Actual installation is up to the authorized
local dealers. Consult with qualified Sony personnel
for installation.
• While the unit is on, a certain amount of heat builds
up inside. This can cause burns. Avoid touching the
top or rear of the unit when it is powered on or just
after it has entered standby mode.
When using the stand (not supplied)
Front
10
(4)
Side
Note
When moving or installing the display when it is
attached to the stand (not supplied), do so with at least
3 people.
7
20 (7 / )
8
10
(4)
10 (4)
Units: cm (inches)
When mounting the display horizontally
Front
10
(4)
Side
When mounting the display vertically
Front
20 (7
25
(9 7 / )
8
10 (4)
Side
Note
When mounting the display vertically, you cannot use
the speakers SS-SP50FW (not supplied).
Caution
25 (9 7 / )
8
10
(4)
7
25 (9 / )
8
5 (2)
Units: cm (inches)
7 / )
8
25
(9 7 / )
8
Make sure that the
1 POWER switch
is at the lower
position.
5 (2)
Units: cm (inches)
13
(GB)