Table of Contents
Advertisement
4. Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Service Positions
4.3 Assy/Panel Removal
4.4 Set Re-assembly
4.1
Cable Dressing
4.2
Service Positions
When moving or laying down an LCD set, at least two people
must work together. Avoid any impact towards the PDP set.
For easy servicing of this set, there are a few possibilities
created:
•
Foam bars (created for Service).
•
Separately available stands.
4.2.1
Foam Bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. See figure "Foam
bars" for details. Sets with a display of 42" and larger, require
four foam bars [1]. Ensure that the foam bars are always
supporting the cabinet and never only the display. Caution:
Failure to follow these guidelines can seriously damage the
display!
By laying the TV face down on the (ESD protective) foam bars,
a stable situation is created to perform measurements and
alignments. By placing a mirror under the TV, you can monitor
the screen.
Mechanical Instructions
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassembly instructions in the described order.
Figure 4-1 Cable dressing
4.2.2
Stands
For this set separately orderable stands are available, which
can also be used during service.
QCS1.0S LA
4.
I_17540_012.eps
EN 7
280108
Advertisement
Table of Contents
