Table of Contents
Advertisement
When connecting to a radio for the first time
It is necessary to register (pair) this product to the transceiver. Before it
will operate with it.
１
Press and hold for 3 seconds
Blinks red
and blue
Blinks
Blue
If not connected, the power will be turned OFF after about 3 minutes.
4
to turn ON
Power ON
Connected
2
Pair the "SSM-BT10" with
the connected radio.
For the pairing procedure,
refer to the Transceiver
Operating Manual.
Paring is complete when
the SSM-BT10 LED blinks
blue. (illustration on the
left). Go to "How to com-
municate" (page 6).
-Pairing-
Advertisement
Table of Contents
