Operating; Oscillation; Cleaning; Technical Features - G3 Ferrari MARINO User Manual

4 screws (4).
6) Insert the fan (3) onto the shaft (6) and secure the fixing screw of the fan (2) in its hole.
7) Remove the fixing screw (16).
8) Place the front grid (1) in front of the rear grid (5) matching the holes on the grids.
9) Close the locking pins and fasten the two grids tightening the securing screw (16) previously removed. The
fan is now correctly assembled.
10) To lift up the fan, loosen the height regulation knob (19), lift the head and tighten the knob.

OPERATING

Once finished assembling the unit, place the fan following the safety instructions, then plug it to the electrical
outlet. By using control panel (10) the rotation power can be adjusted on different speeds.
- 0: fan is OFF
- I: low speed
- II: medium speed
- III: high speed

OSCILLATION

The oscillation of the head is only possible when the fan is turned on and it can be activated by pressing the
pin (7) downwards until it locks. Lifting the pin (7) until the locking function is disabled. It is recommended
to enable or disable oscillation of the fan only when the unit is off.
VERTICAL ADJUSTMENT
To ensure a always good ventilation, the fan can be adjusted vertically.
Turn off the fan and wait for the blades to stop.
- Loosen the knob (13) and tilt the head of the fan to the desired position.
- Tighten the knob (13) by holding the fan in that position.

CLEANING

Disconnect the plug from the electrical outlet before attempting any cleaning operation.
Do not immerse the unit in water. In any case prevent splashes of water or other liquids reaching the motor
body. Do not clean the unit with metallic sponges or abrasive cleaners, only use neutral detergents and a soft
cloth moistened with water to clean the outer parts.
Dry the product completely before operating the unit.

TECHNICAL FEATURES

•
Power supply: AC 230V
•
Fan diameter: 40cm
•
3 operation speeds – Oscillation
PORTUGUÊS: ADVERTÊNCIAS
As indicações seguintes são muito importantes no que se
refere à instalação, uso e manutenção deste aparelho;
conserve com cuidado este manual para eventuais futuras
consultas; utilize o aparelho apenas do modo indicado
neste manual de instruções; outro tipo de utilização
~
50Hz. Power 50W
10