Operation - HAMPTON BAY HB-7401-00 Use And Care Manual

Operation

1
Setting the wireless push
button
The wireless push button (B) has two options for tune
selection: Play the selected "FRONT" door musical
tune or play the "REAR" door designated tune (Ding).
□
The push button (B) comes from the factory
with no jumper (DD) installed on the pins. This
setting will play the "FRONT" door musical
tune.
□
To set the push button (B) to play the "REAR"
door tune (Ding), add the jumper (DD) to the
pins inside the push button (B).
2
Selecting a tune
The doorbell (A) has different selectable tunes. The
push button (B) set as the "REAR" push button (B) will
only play Ding (one note tune). The push button (B) set
as the "FRONT" push button (B) will play either Ding-
Dong (two note tune) or Westminster (eight note tune).
□
Press and release the "TUNE" button (2) on the
doorbell (A) until the desired "FRONT" tune is
heard.
NOTE: All doorbell models are designed to work with up
to 5 wireless push buttons (sold separately).
3
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control (3).
Rotate the volume control (3) to adjust the volume.
Push button (B) set as
"FRONT" door – no
jumper (DD) on the pins
(Factory Default)
NOTE: All doorbells are designed to play only two
different tunes no matter how many push buttons are used.
6
B
Push button (B) set
as "REAR" door –
jumper (DD) is on the pins
VOLUME
2
TUNE-HOLD 1 SEC
SYNC-HOLD 3 SECS
RESET-HOLD 10 SECS
VOLUME
3
TUNE-HOLD 1 SEC
SYNC-HOLD 3 SECS
RESET-HOLD 10 SECS
DD
A
A