MAC TOOLS PDG90-01 Operating Instructions

Operating Instructions • Warning Information • Parts Breakdown
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
Free Speed (RPM) . . . . . . . . . . .70,000
Collet Size (In.) . . . . . . . . . . . . . . .1/8"
Air Inlet (NPT) . . . . . . . . . . . . . . . .1/4"
PDG90-01
PDG90-01_OpMan_031006.indd 1
SPECIFICATIONS
Air Pressure (PSI). . . . . . . . . . . . . . .90
Air Consumption (CFM) . . . . . . . . . 1
Hose Size (I.D.) . . . . . . . . . . . . . 5/16"
1
• MAXIMUM RPM OF 70,000
• MAX AIR PRESSURE:
90 PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
WEAR HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
PDG90-01
Right Angle
Pencil Die
Grinder
Rev. 03/10/06
3/13/06 10:22:46 AM