MAC TOOLS PDG100-01 Operating Instructions Manual

Operating Instructions • Warning Information • Parts Break down
Some dust created by power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of
these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement
and other masonry products, and
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies, depending on how often you
do this type of work. To reduce your exposure to these chemicals:
work in a well ventilated area, and work with approved safety
equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
Free Speed (RPM) . . . . . . . . . . . 70,000
Collet Size (In .) . . . . . . . . . . . . . . . . 1/8"
Air Inlet (NPT) . . . . . . . . . . . . . . . . 1/4"
PDG100-01
®
WARNING
SPECIFICATIONS
Air Pressure (PSI) . . . . . . . . . . . . . . .90
Air Consumption (CFM) . . . . . . . . . 1
Hose Size (I .D .) . . . . . . . . . . . . . 5/16"
1
PDG100-01
PENCIL
DIE GRINDER
WARNING
• MAXIMUM RPM OF 70,000
• MAX AIR PRESSURE:
90 PSIG, 6.2 BAR
• RPM OF THE ACCESSORY
MUST EXCEED TOOL RPM
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID
PROLONGED
EXPOSURE TO
VIBRATION
RPM OF THE
RPM RPM RPM
ACCESSORY MUST
EXCEED TOOL RPM
Rev. 3/13/19