FIAM. LLT OFX Executive LLT/E/18 Product Information page 8

2
Safety instructions
• Intended Use
Once removed from its original packaging, the LLT OFX Executive Desk must be placed on a perfectly flat surface.
All the LLT OFX Executive Desk's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise, the
LLT OFX Executive Desk may lose stability, making it hazardously unstable. Weights, objects and loads must be evenly distributed
across the surfaces of the LLT OFX Executive Desk and well balanced in order to ensure stability and safety. Unevenly placed or
unbalanced weights, objects and loads on the surfaces of the LLT OFX Executive Desk may reduce its stability and thus its safety.
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be
placed on the surface of the LLT OFX Executive Desk. If objects of this kind are placed on the surface of the LLT OFX Executive
Desk in spite of this warning, you are urged to take adequate precautions to prevent damage to the float glass.
When placing sharp objects on the surface of the LLT OFX Executive Desk, a mat of insulating material (such as rubber, cork,
plastic or leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects.
Never place items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
• Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the
LLT OFX Executive Desk.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the LLT OFX Executive Desk, which must be evaluated on each
occasion.
Do not sit, lean or stand upon the float glass surface of the LLT OFX Executive Desk.
Do not use the float glass surface of the LLT OFX Executive Desk as a chopping surface.
Do not strike the LLT OFX Executive Desk with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the LLT OFX Executive Desk, since they may
damage the float glass.
Do not use the LLT OFX Executive Desk for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the
LLT OFX Executive Desk.
Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C
(such as foods just removed from the oven) on the LLT OFX Executive Desk; exposing the surface to stresses of this kind may
damage the glass, reducing its strength and thus its safety level.
Never expose the LLT OFX Executive Desk to intense heat sources (such as stoves or ovens); exposing the table to stresses of
this kind may damage the float glass, reducing its strength and thus its safety level. Do not expose the LLT OFX Executive Table
to temperatures below -10°C or weather; exposure of this kind may damage the glass, reducing its strength and thus its safety
level. The LLT OFX Executive Desk should be placed well away from items such as coat racks or ornaments which may
accidentally fall onto its surface.
• Moving the Desk
To ensure that the LLT OFX Executive Desk is moved in the conditions of the utmost safety, we urge you to comply with the
instructions provided below:
The Desk must always be handled by at least four people, wearing gloves which assure a good grip on the float glass.