After-Cleaning Care
(continued)
8.
Pour dirty water into the
sink and rinse the tank.
11.
Leave all parts out to dry
before reassembling.
14.
Reassemble the dirty
water tank.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
electrical outlet before performing maintenance or troubleshooting on the dock.
10 BISSELL.com
9.
Remove filter from the top
of the tank by pulling it up.
12.
Place the end of the brush
into the right side of the foot.
Press the tab of the brush
down so it locks into place.
15.
Insert the bottom of the
tank first. Pivot the top toward
the machine until it "clicks"
into place.
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
10.
Wash filter and screen with
warm water and mild detergent.
Rinse the bottom of the tank
cover. Important: The filter must
be cleaned and dried after every
use to maximize suction and
performance. Replace the filter
every 3 months.
13.
Replace the brush roll
window by lining up tabs on
the edges of the foot. Press
the window back so it "clicks"
into place.