Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kingship JDW-X
Summary of Contents for Kingship JDW-X
- Page 1 User Manual JDW-X Digital Weighing Scale...
- Page 2 Keep the scale away from the environment with high temperature, high humidity, heavy press, and heavy bump. Always make sure the scale is located in a flat and plane surface. JDW-X - Weighing Scale User Manual...
- Page 3 Dimensions JDW-X JDW-X - Weighing Scale User Manual...
-
Page 4: Symbols On Lcd
If the battery is still running in low-voltage status without recharging, LCD will indicate -OFF- and the scale will sound beep for eight times. Please power off the scale and recharge the battery right away. JDW-X - Weighing Scale User Manual... -
Page 5: Print (Optional)
Net and Gross Weight Value. 1. Pressing [ ] key once could recall the deducted tare weight of container or package. Pressing [ ] key once again, LCD will be indicated 0.000, [→0←] and [Net]. JDW-X - Weighing Scale User Manual... - Page 6 Please press the TARE once to remove the weight value from the LCD display. ZERO Press this key to make the scale be at zero point. LCD will indicate O on the left-bottom corner. JDW-X - Weighing Scale User Manual...
- Page 7 ※ If the quantity is not be selected within 3 seconds, the current quantity on the platter will be acknowledged. ※ Press the [ZERO] key directly to confirm the quantity on the platter without any waiting. JDW-X - Weighing Scale User Manual...
-
Page 8: Setup Functions
UNIT 3. Press , WEIGHT display shows USUAL UNIT 4. Press to select – 2 scale beeps (twice for enable, once for disable) and press ZERO with flashes good twice. Scale will automatically restart. JDW-X - Weighing Scale User Manual... - Page 9 UNIT 4. Press to select – 3 press TARE to show U1- Press UNIT to enter the mode. Press ZERO twice flashes good twice. Scale will automatically restart. U1– enable kg U2– enable pcs JDW-X - Weighing Scale User Manual...
- Page 10 4 press TARE to show U1- Fit Press UNIT to select the U1、U2 the scale will be used the UNIT at boot. Press ZERO twice with flashes good twice. Scale will automatically restart. U1– kg U2– pcs JDW-X - Weighing Scale User Manual...
- Page 11 5 press TARE to enter the Auto-off mode WEIGHT display shows -OFF-. Press UNIT to select the - 5 -, - 15 - , - 30 – or –OFF-. Press ZERO twice with flashes good twice. Scale will automatically restart. JDW-X - Weighing Scale User Manual...
- Page 12 5. Select 6, press the TARE. The scale beeps (twice with the max capacity of “lb”, once with the max capacity of “kg”). 6. Press ZERO once and the WEIGHT display flashes good twice. The scale will automatically restart. JDW-X - Weighing Scale User Manual...
- Page 13 SCALE 5 4 3 2 1 5 4 3 2 1 DATA OUT 9 8 7 6 9 8 7 6 RS232 Wiring Configuration: Baurate: 9600 Parity: None Stop Bit: 1 Data Bit: 8 JDW-X - Weighing Scale User Manual...
-
Page 14: Recharge The Battery
It takes about 8~10 hours to fully recharge the battery. CHARGE LED: Color of LED Status of the battery Initial Connection ORANGE Charging GREEN Fully-charged Power Requirements AC: 110V±10%, 60Hz DC: 6V/4Ah rechargeable battery; P=0.2W(max) JDW-X - Weighing Scale User Manual... - Page 15 Digital Weighing Scale We do more than you expect JDW-X - Weighing Scale User Manual...
Need help?
Do you have a question about the JDW-X and is the answer not in the manual?
Questions and answers