JohnDow Industries JDI-FST15 User Manual

JohnDow Industries JDI-FST15 User Manual

15-gallon fuel station

Advertisement

Quick Links

15-GALLON FUEL STATION
USER'S MANUAL
UN/DOT APPROVED
Part No. JDI-FST15
FOR WARRANTY INFORMATION, PLEASE CALL 800-433-0708
DATE OF PURCHASE:
READ AND SAVE THIS MANUAL
FOR SERVICE ASSISTANCE, CALL 800-433-0708 OR VISIT JOHNDOW.COM
Rev 6/2021
151 Snyder Ave.
FST-MAN-ENG
Barberton, OH 44203

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JDI-FST15 and is the answer not in the manual?

Questions and answers

Summary of Contents for JohnDow Industries JDI-FST15

  • Page 1 ™ 15-GALLON FUEL STATION USER’S MANUAL UN/DOT APPROVED Part No. JDI-FST15 FOR WARRANTY INFORMATION, PLEASE CALL 800-433-0708 DATE OF PURCHASE: READ AND SAVE THIS MANUAL FOR SERVICE ASSISTANCE, CALL 800-433-0708 OR VISIT JOHNDOW.COM Rev 6/2021 151 Snyder Ave. FST-MAN-ENG Barberton, OH 44203...
  • Page 2 Important Safety Information Read user's manual and this safety information before using this fuel station. DANGER DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. The use of this product includes the • If swallowed, do not induce vomiting. Call physician immediately.
  • Page 3 Resources for additional information: https://www.phmsa.dot.gov/regulations-and-compliance https://www.phmsa.dot.gov/about-phmsa/phmsa-faqs GETTING STARTED Before assembly, ensure you have all parts according to the contents list below. If any parts are missing or damaged, contact JohnDow Industries for replacement. CONTENTS Item No. Description Qty. Tank 1/2” x 10' Hose w/1/2” NPT & 3/4” NPT Fittings...
  • Page 4 ASSEMBLY INSTRUCTIONS Before use, read and follow all safety instructions on page 2 of this user's manual. 1. Remove ground screw [5] from tank [1] leg using screwdriver or nut driver. Assemble green ground wire [4] to tank by placing screw through the connector and reattaching to tank leg. Tighten securely using screwdriver or nut driver.
  • Page 5 TO DRAIN FUEL FROM HOSE BACK INTO FUEL STATION Before use, read and follow all safety instructions on page 2 of this user's manual. 1. Elevate dispensing the nozzle above the hose and slope the hose back to the valve providing a clear path for fluid to drain.
  • Page 6 Leakproofness testing. Perform on an empty JDI-FST15 tank only. Apply a 3.0 psi air pressure and using a test method per Appendix to Part 178 – Alternate Leakproofness Test Methods. Acceptable...

Table of Contents