Advertisement
Quick Links
P.A. – S.p.A. – EQUIPAGGIAMENTI TECNICI DEL LAVAGGIO
VIA MILANO, 13 – CASELLA POSTALE 115 – 42048 RUBIERA (REGGIO EMILIA) – ITALY
Tel. +39 0522 623611 – Fax. +39 0522 629600 – R.E.A. RE 156319 – R.I. RE11535 – Mecc. RE 013446
C.F. e P. IVA 01035950359 – Cap. Soc. i.v. € 750.000,00 – Codice Identificativo C.E.E. IT 01035950359
ART. 2497 – BIS C.C. DIREZIONE E COORDINAMENTO BENETTI srl R.I. TRIB. DI RE 01480690351
.
VS1100
- RELIEF VALVE - STAINLESS STEEL AISI 303
Suitable for use as a relief valve in high pressure systems.
CONSTRUCTION MATERIAL
PART
RATED
NUMBER
PRESSURE
bar
psi
60.0680.00 1000
14500 1100 15960
60.06**.00
1000
14500 1100 15960
1) The valve has been designed for a continuous use at a water temperature of 100°C (212°F).
It can work for short periods at a maximum temperature of 120°C (250°F)
DIMENSIONAL DRAWING
Web: http://www.pa-etl.it – E-mail: info@pa-etl.it
•
60.0680.00 VS1100
•
60.06** .00 VS1100
TECHNICAL SPECIFICATIONS
:
AISI 303 Stainless steel
BODY
SPRING HOLDER:
Hnbr
SEALS:
PERMISSIBLE
MINIMUM
PRESSURE
CALIBRATION
PRESSURE
bar
psi
bar
psi
300
4350
300
4350
-
Valve intended for professional use
-
Stainless steel body AISI 303
-
Stainless steel internal parts
-
Totally protected moving parts
-
Calibration protection (TYPE A)
nickel plated brass
MAX
MAX
TEMPERATURE
FLOW RATE
(1)
°C
°F
l/min
100
212
40
100
212
40
Ultimo aggiornamento: 30/09/21
DN 10
TYPE A
TYPE B
WEIGTH
INLET
OUTLET
USG
g
oz.
10.6
2100
74.08
G 3/8" F
10.6
2100
74.08
G 3/8" F
1
Advertisement
Related Manuals for P.A. VS1100
Summary of Contents for P.A. VS1100
- Page 1 Suitable for use as a relief valve in high pressure systems. DN 10 • 60.0680.00 VS1100 TYPE A • 60.06** .00 VS1100 TYPE B Valve intended for professional use Stainless steel body AISI 303 Stainless steel internal parts Totally protected moving parts...
- Page 2 Ultimo aggiornamento: 30/09/21 INSTRUCTIONS SELECTION This product is to be used with clean water, even slightly mixed with normal detergents. For use with different or corrosive liquids, please contact the PA Technical department. Appropriate filtration should be installed when using unpure liquids. Please make sure that the valve is in line with the working data of the machine where it is to be installed (permissible pressure, maximum flow and rated temperature of the system).
- Page 3 Ultimo Aggiornamento: 30/09/21 PRESSURE CALIBRATION The valve is supplied not calibrated. The calibration should be carried out with the system in operation under pressure. The valve calibration pressure is determined by operating on the adjusting screw (item 2): the calibration pressure is increased by turning the ad- justing screw clockwise.
- Page 4 • 6 60.0434.61R Spring, 8,5x38x80 mm black 17 60.0683.51R Seat, 5,8x13,9x6 mm Sst. • 7 60.0654.31R Spring rest pin, brass 18 60.0681.55R Housing -VS1100 3/8 Bsp FF aisi303 8 10.4015.12R Back-up ring, 12,7x15,5x1,2 mm • ** On request Description K1 60.0688.24 Spares kit -Vs 1100, 8x1pcs.