Advertisement
MicroGreen Ball
Quick Manual Guide
Thank you for your interest having MicroGreen Ball. Hope you will like it very much.
The MicroGreen Ball has the conditions for precision planting,including light,air,water,etc. From the succulent plants to the mosses of wetland
and aquatic ecology,all that could get sufficient growth conditions in the intelligent mode without the special care. Its automatic mode provides
the function of photometric sensing,which is quite suitable for creative placement or hanging in the environment of restaurant,
balcony and indoor garden, and no need to worry about the lack of light at all.
The MicroGreen Ball produce fresh air and positive energy every day, as well as the living environment that changes and projects light and
shadow with the growth of plants. It provides the automatic On / Off mode. In the early morning, it can be awakened by the MicroGreen Ball
gradually as the phototherapy and to start the beautiful day; and at night, it can also help to fall asleep surrounded by the green andscaping.
When several MicroGreen Balls are hung alternately up and down,the indoor environment soon becomes a 3D ecological garden immediately,
with High Color Accuracy up to Ra90 grow light to display the true color of the garden and flood light.
Now,let's begin the wonderful planting journey....
Front View
Rear View
D
C
B
E
A
A. Function button
B. Function indicator
E. Power port (USB type C) F. Air outlet
Standard Accessories
(2) Terrarium
(3) Water bottle
(1) Main Device
(6) Transformer
(7)
Moisturizing cover
Aquarium set (Optional)
Hanging set (Optional)
Fix holder
(1) Air Pump
(3) Water Filter
(1)
(2) Buble Tube
Model: OFA02
Model: OFA01A
Hanging set setup:
Hanging set can handle weight up to 10kg and Win the 3D Sky Garden Art design around the room.
Step 1
Step 2
Fasten the fixing piece to the
Place the base on the fixing piece.
eiling with screws.
Step 4
Step 5
Insert the transformer in the base.
Plug the USB power cable into
the adapter.
OPCOM
MicroGreen Ball
Model : OFG009
Bottom View
Top View
F
G
H
A
C. Remote control receiver
D. Remote control receiver
G.Water port rubber
H.Power port (DC Jack)
(4) Remote controller
(5) USB Power cord
TIMER
MODE
COLOR
RT-01
(8)
Decoration accessories
(9) Manual / Warranty Card
+
Remote controller
Battery
Microlandscape tool set(Optional)
(2) Hanging wire
● Scissors
10kg weight capability
● Short Clip
● Long handle clip
● Long handle brush
(3) Cable ties x3
● Long handle scraper
● Leather case
Model: OFA03
Hook
AC Power
Step 2
Use screws to lock the base to
the fixing piece.
Cable tie (3)
Step 6
Adjust the lanyard to the proper
length.
Step 1
Place the main device on the terrarium
by tightening 3 screws
Step 4
Unplug the stopper from the water port
Succulents
Aquarium
Nut
Step 1:
socket
Unscrew the device to open
glass terrarium port and set up
Nut
Aquarium planting.
Step 2:
Ceiling
Plug Bubble tube(2)
into water filter(3) and
Fix holder (1)
put into water bottom.
Step 3:
AC Adapter(6)
Plug Bubble Tube(2)
another end to Air Pump(1) ;
Hanging wire(2)
and screw device to glass terrarium.
Step 4:
Plug Power Code type C connector
to Air Pump(1) and plug Air Pump(1)
type C connector to device.
Press Air Pump(1) button to switch ON/OFF pump>
Installation
Step 2
Plug in the USB cable
Step 5
Use the drop bottle to fill the water into
the opening (This step is only for Garden Mode,
not recommend for other modes, to maintain
the humidity of the moss and ferns)
Planting
Moss / Ferns
No water in tank.
Drip water every 5-7 days.
Succulents garden design
with Decoration part(8).
Dirt Layer (1" Height)
Light stone Layer (1.5" Height)
Aquarium set
Air Pump(1)
Fixing screw
Aquarium set
Bubble Tube(2)
Aquarium set
water filter(3)
OPCOM
MicroGreen Ball
Step 3
Plug USB adapter to AC power outlet
Step 6
Drip the water into the glass terrarium
Drip water into tank around every week
or water shortage red light on for wet air.
Drip water against different plants nesessary.
Moisture Cover
Moss / Ferns / Microgreen wet plants
garden design with decoration parts(8).
Dirt Layer (1" Height)
Sphagnum moss Layer (1" Height)
Light stone Layer (1.5" Height)
Welcome to check our
planting videos from
www.opcomfarm.com
Advertisement
