Serato Reloop Ready Quick Start Manual page 5

Performance Pads
PITCH PLAY mode: Hold the MODE button and press PAD 5 to select PITCH PLAY mode. This requires
the Serato Pitch 'n Time DJ expansion pack activated, see the
Information.
SCRATCH BANK mode: Hold the MODE button and press PAD 6 to select SCRATCH BANK mode.
Scratch Bank Mode allows you at assign files in your Serato DJ Pro library to a pad. When a pad is
triggered, the file corresponding file will be loaded to deck. See the
information.
LOOP ROLL mode: Hold the MODE button and press PAD 7 to select LOOP ROLL mode. Holding pads
1-8 activates a loop roll of varying sizes. Release the pad to exit the Loop Roll. Use the PARAMETER
buttons to shift the roll position to the left or right. Hold Shift and press the PARAMETER buttons to change
the 8 selected loop size options.
BEAT GRID mode: Hold the MODE button and press PAD 8 to select BEAT GRID mode. In this mode,
PAD 1 is Large Adjust Left, PAD 2 is Small Adjust Left, PAD 3 is Small Adjust Right and PAD 4 is Large
Adjust Right. PAD 5 is Large Slip Left, PAD 6 is Small Slip Left, PAD 7 is Small Slip Right and PAD 8 is
Large Slip Right.
USER mode: Hold the SHIFT button and press the MODE button to select USER mode. In this mode the
pads are blank and available to be user mapped. See the
Scratch Banks
Holding the MODE button and pressing PAD 6 on the Reloop Ready will enable SCRATCH BANKS. This
mode allows you at assign files in your Serato DJ Pro library to a pad. When a pad is triggered, the file
corresponding file will be loaded to deck. The left set of pads will load to deck 1 where as the right will load
to deck 2.
Click the Scratch Bank button
In this panel you can load and eject files from the Scratch Banks, as well as chose the preferences you wish
to load to the deck upon triggering the pad. These preference include the start point of the file, Key Lock
on/off and Repeat on/off. Clicking the
Advanced and Simple View.
Use the PARAMETER buttons to move through SCRATCH BANKS A to D.
Holding SHIFT and clicking on any Scratch Bank pad will unload the currently loaded Scratch Bank file and
re-load the last track to be loaded to that deck.
MIDI section
in the top tool bar of Serato DJ Pro to reveal the Scratch Bank Panel.
button in the top left corner of the panel will change between
PITCH PLAY section
SCRATCH BANK section
for more information.
for more
for more
5