Dell E1920H Teardown Instruction page 3

DELL E1920H Teardown Instruction
9. Separate Front Cover from Panel:
a. Tear off Keypad cable from Panel. Taped
on "1, 2, 3".
b. Turn the monitor to the front view and
remove front cover.
1. Product Material Information
The following substances, preparation, or components should be disposed of or recovered separately
from other WEEE in compliance with Article 4 of EU Council Directive 75/422/EEC.
Capacitors / Condensers (containing PCB/PCT)
Mercury containing components
Batteries
Printed circuit boards (with surface greater than 10
square cm)
Component contain toner, ink and liquids
Plastic containing BFR
Component and waste contain asbestos
CRT
Component contain CFC, HCFC, HGC and HC
Gas discharge lamps
LCD display > 100 cm2
External electric cable
Component contain refractory ceramic fibers
Component contains radio-active substances
Electrolyte capacitors (height > 25mm,
diameter >25mm)
2. Tools Required
List the type and size of the tools that would typically can be used to disassemble the product to a
point where components and materials requiring selective treatment can be removed.
Tool Description:
3
a.
b. Lift the bulk capacitor away from power
Not used
Not used
Not used
Product has printed circuit boards (with surface
greater than 10 square cm)
Not used
Not used
Not used
Not used
Not use
Product LCD greater than 100cm2
Product has external cables
Not used
Not used
Product has electrolyte capacitors (height > 25mm)
Take out the capacitor pin solder with
soldering iron.
board.
3