Step 1; Step 2 - modway EEI-2855-GRY-WAL Assembling Instruction

EEI –2855
TV STAND

STEP 1:

Put Top Panel (B) upside down on a carpeted or padded surface.
Place 1 piece of Metal Frame (A) to Top Panel (B).
Insert 4 pieces of Bolt (1) into the pre-drilled holes on Top Panel (B) through the pre-drilled holes on Metal Frame (A).
Use Allen Wrench (3) to tighten Bolts (1). Do not fully tighten Bolts (1) at this step.
3
1
1x4 3x1

STEP 2:

Put Shelf (D) upside down on a carpeted or padded surface.
Place 1 piece of Metal Frame (A) to Shelf (D).
Insert 4 pieces of Bolt (1) into the pre-drilled holes on Shelf (D) through the pre-drilled holes on Metal Frame (A).
Use Allen Wrench (3) to tighten Bolts (1). Do not fully tighten Bolts (1) at this step.
3
1
1x4 3x1
Customer Service 908-368-1025︱www.modwayfurniture.com
B
1
D
1
1
1
A
Hardware & Tools required
1
A
Hardware & Tools required
1
Page 2 of 4