NOREGON DLA+ 2.0 User Manual
  1. Manuals
  2. Brands
  3. NOREGON Manuals
  4. Adapter
  5. DLA+ 2.0
  6. User manual

NOREGON DLA+ 2.0 User Manual

Hide thumbs Also See for DLA+ 2.0:
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for NOREGON DLA+ 2.0

Summary of Contents for NOREGON DLA+ 2.0

  • Page 2: License Agreement

    Pictures, figures and tables are for illustration purposes only. Product specifications are subject to change without notification. The DLA+ 2.0 Wireless adapter is compliant with Part 15 of the FCC Rules. The device contains an RF transmitter (ID 3867A MTCHDRCT). THE FCC ID is R68 MTCHDRCT.

  • Page 3: Table Of Contents

    DLA+ 2.0 Wireless Configuration ......................... 13 The DLA+ 2.0 Wireless Minder ......................... 13 Configuring the DLA+ 2.0 Wireless Adapter (ASSY REV A.xx) ................14 Configuration on a Local / Corporate Network ....................16 Configuring the DLA+ 2.0 Wireless Adapter (ASSY REV B.xx) ................31 Establishing the Connection Between your PC and the Adapter ................

  • Page 4: The Noregon Dla+ 2.0 Adapter Family

    Type-2 9-pin connector. This connector can have up to 3 CAN channels (Tri CAN). The DLA+ 2.0 and DLA+ 2.0 Wireless adapters and their cables will work with all existing vehicles and with newer vehicles that will have the Type-2 9-pin connector.
  • Page 5 1. Flashes red once per second (heartbeat) to indicate Adapter is ready for use and no data is being transmitted on the device (DLA+ 2.0 and DLA+ 2.0 Wireless only). 2. Flashes steady red when the device is reading data regardless of protocol.

  • Page 6: Product Specifications And System Requirements

    DLA+ 2.0 Adapter Family User’s Manual Product Specifications and System Requirements DLA+ 2.0 DLA+ 2.0 Wireless Trailer Diagnostics 32-Bit Operating System Requirements Windows 7 Pro (current service pack) Windows 8 Windows 10 32-bit Minimum PC Requirements Pentium IV or faster...

  • Page 7: Supported Protocols And Standards

    ISO 9141-2 ISO 14230 (KWP2000) ISO 15765-4 J1850 VPW (GM Class II) Supply Voltage The following table specifies the voltage required by the DLA+ 2.0 Adapters. 9-36 VDC Vehicle Input Voltage Range 5.0 VDC USB Voltage No more than 500mA...

  • Page 8: Temperature

    DLA+ 2.0 Adapter Family User’s Manual Temperature The DLA+ 2.0 Adapters shall operate over the following temperatures and meet all of its functional and performance specifications. (-40 to 80 C) Storage Range -40 to 176 F 0 to 149 F (-18...

  • Page 9: Installation Notes

    Installation files can be accessed using a USB flash drive or online at http://www.noregon.com/adapter-drivers. Insert the DLA+ 2.0 Driver USB Flash drive or the Professional USB flash drive into your USB port or download the latest adapter drivers from http://www.noregon.com/adapter-drivers.

  • Page 10: Driver Installation

    3. The Installer will appear, select Install to begin. Figure 1 NOTE: The screen shown in the example reflects installing a DLA+ 2.0 Wireless Adapter; however, the driver installation steps for all DLA+ 2.0 Adapters are the same. 4. This screen appears; select the Next button.
  • Page 11 Installation Notes 5. Click the check box to accept the License Agreement and click the Next button. Figure 3 6. Click the Next button. Figure 4 7. Click the Install button. Figure 5...
  • Page 12 Click the Finish button. Figure 8 Once the latest drivers are installed, you can connect the adapter to the computer via USB cable and begin to use you DLA+ 2.0 Family adapter. Please proceed to configure Wireless settings if applicable.

  • Page 13: Dla+ 2.0 Wireless Configuration

    If you right click on the icon and select “Show Details”, a box will display that your DLA+ 2.0 Wireless Adapter is not yet configured and therefore not getting a signal as indicated by the red “Round Trip Time (ms)” status bar.

  • Page 14: Configuring The Dla+ 2.0 Wireless Adapter (Assy Rev A.xx)

    NOTE: Depending on your system security settings, you may receive a Windows Security Alert like the one in Figure . If so, verify the name of the program in the alert is the JPRO® DLA+ 2.0 Wireless Configuration Tool and click the Unblock button.
  • Page 15 Figure 12 4. Click the Configure Adapter via USB button on the toolbar (see highlighted box in Figure ). Figure 13 Below are default settings that will appear while configuring your DLA+ 2.0 Wireless Adapter: Network Name (SSID) LTRX_IBSS Network Type...

  • Page 16: Configuration On A Local / Corporate Network

    DLA+ 2.0 Adapter Family User’s Manual Configuration on a Local / Corporate Network NOTE: If you are configuring your DLA+ 2.0 Wireless Adapter to connect to a local / corporate network, it is highly recommended to consult your network administrator.
  • Page 17 8. Enter the Network Security values. Authentication, Encryption, Key Type, Key and Retype Key then click Save. After selecting OK, this screen will appear indicating your DLA+ 2.0 Wireless Adapter is configured and ready to connect with your PC once a network connection is established.
  • Page 18 DLA+ 2.0 Wireless Adapter. Configuration on a Peer-to-Peer Network Configuring a DLA+ 2.0 Wireless Adapter on a peer-to-peer network means the DLA+ 2.0 Wireless Adapter will communicate with your PC without going through a local / corporate Wireless network.
  • Page 19 Installation Notes Figure 18 Toggle between the Network and Wireless tabs where the default settings display. Figure 19 Figure 20 From the Network tab, ensure the last 3 digits in the IP Address field are unique (numbers can only be from 1 to 255).
  • Page 20 3. Select OK on the below dialog. Figure 22 4. After selecting OK, this screen will appear indicating your DLA+ 2.0 Wireless Adapter is configured and ready to connect with your PC once a network connection is established. Figure 23...
  • Page 21 DLA+ 2.0 Wireless Adapter. Configuring Your PC to use the DLA+ 2.0 Wireless Adapter on a Peer-to-Peer network NOTE: If you have configured your adapter to work on your local / corporate network and your PC is connected to your local / corporate network, then skip to section.
  • Page 22 DLA+ 2.0 Adapter Family User’s Manual Wireless Configuration using Windows® 7 1. Click the Start button and click Control Panel. Figure 24 2. Click the Network and Internet link. Figure 25...
  • Page 23 Installation Notes 3. Under the Network and Sharing Center section, click Connect to a Network. Figure 26 4. Select the LTRX_IBSS network in the Wireless Network list and click the Connect button. Figure 27...
  • Page 24 DLA+ 2.0 Adapter Family User’s Manual 5. Under the Network and Sharing Center section, click again Connect to a Network. Figure 28 6. Right click on the LTRX_IBSS network and select Status. Figure 29...
  • Page 25 Installation Notes 7. Click the Properties button. Figure 30 8. Highlight Internet Protocol Version 4(TCP/IPv4) and click the Properties button. Figure 31...
  • Page 26 DLA+ 2.0 Adapter Family User’s Manual 9. Select Use the following IP address radio button to assign the static IP address. ➢ The first three values of the IP address (i.e. 192.168.2) must match the Adapter’s IP address you entered in Configuration on a Local/Corportate Network.
  • Page 27 Installation Notes Figure 33 13. On the left side of the dialog, click the Manage Wireless Networks link (see highlighted box in Figure 34 below). Figure 34...
  • Page 28 DLA+ 2.0 Adapter Family User’s Manual 14. Click the Add button (see highlighted box in below). Figure 35 15. Click Manually Create a Network Profile. Figure 36...
  • Page 29 Installation Notes 16. Enter LTRX_IBSS in the Network name field exactly as shown (name is case sensitive) in Figure 37. Figure 37 17. Select No authentication (Open) from the Security Type dropdown list. 18. Click the Next button. NOTE: Windows 7 does not support automatic connections on unsecure peer-to-peer networks. You will need to re-select the LTRX_IBSS network each time you reboot your PC.
  • Page 30 DLA+ 2.0 Adapter Family User’s Manual 20. The Wireless Network Connection list is updated to display the network you just added. Figure 39 21. Proceed to Establishing the Connection Between your PC and the Adapter.

  • Page 31: Configuring The Dla+ 2.0 Wireless Adapter (Assy Rev B.xx)

    NOTE: Depending on your system security settings, you may receive a Windows Security Alert like the one in Figure . If so, verify the name of the program in the alert is the DLA+ 2.0 Wireless Configuration Tool and click...
  • Page 32 DLA+ 2.0 Adapter Family User’s Manual Figure 41 9. Click the Configure Adapter via USB button on the toolbar (see highlighted box in Figure 42). Figure 42 (DEFAULT settings) Configuration as Stand-alone Access Point Once you have clicked Configure Adapter via USB, this screen will appear.
  • Page 33 Installation Notes Figure 3 - Default Security settings Network Name (SSID) DLAWIR32-TI-XXXXXX (where XXXXXX is part of the device’s MAC Address) Network Type Access Point Region Channel Security WPA / WPA2 Personal Key Type Passphrase password (Network Password) IP Address 192.168.1.1 Subnet Mask 255.255.255.0...
  • Page 34 Adapter. Configuration on Connecting to an existing (wireless) network NOTE: If you are configuring your DLA+ 2.0 Wireless Adapter to connect to a local / corporate network, it is highly recommended to consult your network administrator. Once you have clicked Configure Adapter via USB, this screen will appear.

  • Page 35: Establishing The Connection Between Your Pc And The Adapter

    Installation Notes Figure 47 5. After selecting OK, Figure 44 will appear indicating your DLA+ 2.0 Wireless Adapter is configured and ready to connect with your PC once a network connection is established. Continue to Establishing the Connection Between your PC and the Adapter.
  • Page 36 If your adapter is still not listed in the Configuration Tool please see the FAQ’s section on page 6. Highlight the desired DLA+ 2.0 Wireless Adapter in the list that will be used for vehicle communications with OEM applications and click the Select Adapter button. Figure 50 Note multiple adapters that have been configured may be detected and display on a local or corporate network.

  • Page 37: The Favorites Feature To Select Ip Addresses

    Reception Guidelines on page 45. Figure 52 7. Close the DLA+ 2.0 Wireless Configuration Tool window by clicking the X button in the top right corner. 8. Congratulations! Your DLA+ 2.0 Wireless adapter is ready to connect with a vehicle. Verify your connection settings are correct in the OEM software.
  • Page 38 DLA+ 2.0 Adapter Family User’s Manual Figure 54 2. After selecting Favorites, select the New Button. Figure 55 3. Enter the Adapter’s IP address in the field and click Add. Figure 56...
  • Page 39 Windows Security and Firewall Settings The DLA+ 2.0 Wireless Configuration Tool will attempt to discover the DLA+ 2.0 Wireless adapters connected to your network by sending out requests on TCP and UDP ports 30718. Steps may need to be taken to configure...

  • Page 40: Updating Adapter Firmware

    Automatic Firmware Update If a firmware update is required when you connect your DLA+ 2.0 Adapter to your OEM application, you will be alerted: Figure 58 NOTE: Automatic firmware updates are not supported via a wireless connection. Automatic updates must be made using a USB connection.
  • Page 41 Installation Notes 2. When you select OK from the original alert dialog box, this update dialog displays: Figure 60 3. When the update is successfully finished, this screen displays: Figure 61 4. If an error is encountered, this type of message displays. Select OK to return to your OEM application. Figure 62...

  • Page 42: Manual Firmware Update

    4. Connect the other end of the USB cable to the port labeled Computer on the adapter. 5. Launch USB Device Update Tool from the Start Menu  Noregon. 6. Verify a device shows up in the ‘Connected Devices’ list column.
  • Page 43 Installation Notes 8. Highlight the DLA.dfu file and then click Open. Figure 64 9. Click the Upgrade button. 10. Click Yes to continue (do not disconnect or power down device). Figure 65...
  • Page 44 DLA+ 2.0 Adapter Family User’s Manual 11. The device will be programmed. Figure 66 12. Verify that the version is updated in the ‘Connected Devices’ list column.

  • Page 45: Wireless Reception Guidelines For Dla+ 2.0 Wireless

    Minimize interference: • Cordless phones share the 2.4Ghz radio band used by the PC and DLA+ 2.0 Wireless. These devices will interfere with the radio signal. Use cordless phones that use the 5.8Ghz or 900Mhz bands. •...
  • Page 46 DLA+ 2.0 Adapter Family User’s Manual WARNING: DO NOT ATTEMPT TO USE REPROGRAMMING FEATURES WHILE IN WIRELESS MODE (use USB mode).

  • Page 47: Testing Vehicle Connections

    Select the Start Test button. Figure 67 Within a few seconds this screen will open and the scroll boxes that correspond to the selected adapter will be populated. NOTE: The screen shot above shows a DLA+ 2.0 Wireless Adapter connected via USB.

  • Page 48: Frequently Asked Questions And Troubleshooting

    DLA+ 2.0 Adapter Family User’s Manual Frequently Asked Questions and Troubleshooting NOTE: Check the “Resources” section of www.Noregon.com website for the latest FAQs and Troubleshooting steps. Question POSSIBLE CAUSES SOLUTION The adapter power light is on but my The drivers have not...

  • Page 49: Rp1210 Error Codes

    Installation Notes RP1210 Error Codes RP1210 standard Error Codes Code Description DLL was not initialized. The client ID is not valid. The client is already connected to the specified device. The maximum number of connections has been reached. A memory de-allocation error has occurred. A memory allocation error has occurred.
  • Page 50 DLA+ 2.0 Adapter Family User’s Manual An INI file value was invalid. ERR_DEVICE_NOT_SUPPORTED ERR_INVALID_PORT_PARAM The Command timed out. ERR_OS_NOT_SUPPORTED ERR_COMMAND_QUEUE_IS_FULL ERR_CANNOT_SET_CAN_BAUDRATE ERR_CANNOT_CLAIM_BROADCAST_ADDRESS ERR_OUT_OF_ADDRESS_RESOURCES ERR_ADDRESS_RELEASE_FAILED ERR_COMM_DEVICE_IN_USE The requested protocol is not compatible with an existing datalink. ERR_ADAPTER_NOT_RESPONDING ERR_CAN_BAUD_SET_NONSTANDARD ERR_MULTIPLE_CONNECTIONS_NOT_ALLOWED_NOW ERR_J1708_BAUD_SET_NONSTANDARD ERR_J1939_BAUD_SET_NONSTANDARD...

  • Page 51: Technical Support

    Failed to obtain the device status during firmware perform update. Technical Support For additional support for connecting your adapter via other protocols, diagnostic applications, speeds, etc., please contact Noregon Systems Help Desk using one of the following: E-mail: support@noregon.com Online: http://www.Noregon.com/...

  • Page 52: Appendix 1 -Windows 8/10 Configuration Via Windows Mobile Hotspot

    DLA+ 2.0 Adapter Family User’s Manual Appendix 1 –Windows 8/10 Configuration via Windows Mobile HotSpot NOTE: Windows 8/10 Configuration via Windows Mobile HotSpot is compatible with (ASSY REV A.xx) and (ASSY REV B.xx) DLA+ 2.0 Wireless adapters. Windows Mobile HotSpot Configuration 1.
  • Page 53 1. Connect your DLA+2.0 Wireless Adapter via USB cable (make sure you have already installed drivers for the adapter following the installation USB flash drive and instructions provided) 2. Click on Start> Noregon> JPRO® DLA+ 2.0 Wireless Configuration Tool 3. Hover over and click on "Configure Adapter via USB "...
  • Page 54 DLA+ 2.0 Adapter Family User’s Manual 13. Wait for the Red LED on the wireless adapter to turn on solid. 14. Click on the search button. You will see your adapter listed. Figure 71 Figure 72 10. Highlight the adapter by hovering over it and clicking on it. Then click on "Select Adapter". This will put a...
  • Page 55 1. Connect your DLA+2.0 Wireless Adapter via USB cable (make sure you have already installed drivers for the adapter following the installation USB flash drive and instructions provided) 2. Click on Start> Noregon> JPRO® DLA+ 2.0 Wireless Configuration Tool 3. Hover over and click on "Configure Adapter via USB "...
  • Page 56 DLA+ 2.0 Adapter Family User’s Manual Figure 74 10. The configuration tool will automatically search and find no adapter the first time and this is normal. 11. Wait for the Red LED on the wireless adapter to turn on solid.
  • Page 57 Installation Notes Figure 76 13. Highlight the adapter by hovering over it and clicking on it. Then click on "Select Adapter". This will put a check next to the adapter in the list and your adapter will be ready to use.

This manual is also suitable for:

Dla+ 2.0 wireless

Table of Contents