Safety Notes - Bosch Professional GRO 10,8 V-LI Original Instructions Manual

OBJ_BUCH-2020-001.book Page
| English
6 | Deutsch
English

Safety Notes

General Power Tool Safety Warnings
Read all safety warnings and all
WARNING
instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your
mainsoperated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
 Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
 Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
 Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
Electrical safety
 Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock.
 Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
 Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
14
 Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges and moving
parts. Damaged or entangled cords increase the risk
of electric shock.
 When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
1 619 P 11 460 | (26.11.13)
6 Tuesday, November 26, 2013 2:57 PM
 If operating a power tool in a damp location is
Personal safety
 Stay alert, watch what you are doing and use
 Use personal protective equipment. Always wear eye
 Prevent unintentional starting. Ensure the switch is
 Remove any adjusting key or wrench before turning
 Do not overreach. Keep proper footing and balance
 Dress properly. Do not wear loose clothing or
 If devices are provided for the connection of dust
Power tool use and care
 Do not force the power tool. Use the correct power
 Do not use the power tool if the switch does not turn
cord suitable for outdoor use reduces the risk of
electric shock.
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in
personal injury.
at all times. This enables better control of the power
tool in unexpected situations.
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long
hair can be caught in moving parts.
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
Bosch Power Tools