goSilver Basic V05.2 Instruction Manual

goSilver
®
input connector
for 48VDC power
select button
selection of ppm
40 mg/L
20 mg/L
10 mg/L
5 mg/L
rotary switch
for selection of 4
amounts of water
start button
start of the
electrolysis
polarity
change LED
goSilver
®
TRUEppm
goSilver's TRUEppm technology
calculates dynamically the individual duration for the
production of the colloidal silver dispersion, depending on
temperature, quantity and quality of the distilled water.
Thus the production time can vary widely. When finished
the goSilver automatically switches to standby.
goSilver © products are designed for the production of col-
loidal silver with cold water (room temperature). With cold
water you get a clear, mostly ionic solution. With perma-
nent heated 90°C water a more yellowish, mostly colloidal
solution.
The silver content is given by us in mg / liter (milligrams per
liter). The inscription shows the TRUEppm for production
with cold water and the supplied silver electrodes „Regu-
lar". In a production with permanently 90 ° C water tempe-
rature doubles this value.
mg/liter = parts per million (ppm)
250ml = 250 milliliters of water ≈ 1 cup
400ml = 400 milliliters of water ≈1,6 cups
600ml = 600 milliliters of water ≈ 2,5 cups
1l = 1 liter of water ≈ 4 cups
Lake Vision UG (limited liability)
Seestraße 9
D-86919 Utting a. Ammersee
Germany
goSilver Basic V05.2
instruction manual
www.gosilver.solutions
mail@gosilver.solutions