Related Manuals for Storkcraft 01720-305-IW
Summary of Contents for Storkcraft 01720-305-IW
- Page 2 n on Custom rs living in th Uni d Sta and Canada If you are missing parts, hardware, or if your product has been damaged during shipping, DO NOT RETURN YOUR PRODUCT The store does not stock parts and may not be able to help you. Contact Stork Cra directly and w will ship you th parts you need to your shipping address at no cost to you.We have three convenient ways for you to reach us: Visit us at...
- Page 3 KEEP instructions for future use. Age: 6 to 24 months. Adult assembly required. This gate is for use in openings from 25 to 42.5 inches Keep small parts away from children during assembly. Remove all contents from packaging and discard box, and/or poly bags. READ all instructions before assembly and use of the gate.
-
Page 4: Parts List
Parts List Gate panel Binder screw #8 X 2” pan head screw Square nut Lock nut Latch bolt Upper hinge bolt Lower hinge bolt Upper hinge bracket Lower hinge bracket Upper latch plate Lower latch plate Gate stop Wrench Tools needed Hardware Sac de quincaillerie Phillips or at blade... -
Page 5: Avant De Commencer
To Clean: Pour nettoyer : Avant de commencer To successfully install your gate, please note the following: Pour réussir à installer votre barrière, veuillez noter ce qui suit : Only install hardware into stair posts, door frames or wood studs behind Installez la quincaillerie uniquement dans les poteaux d’escaliers, les cadres wall. - Page 6 Install Latch Plates Drill pilot holes at all marks. Gate Stop Butoir Locate gate stops on upper and lower latch plates and install to prevent gate from swinging in both directions (Figure a). Use gate stop in hole Installer les plaques de verrou Percez les trous pilotes sur toutes les marques.
- Page 7 To Install Install Gate Panels Install panel with hinge bolts into mounted hinge brackets by inserting upper and lower bolts into upper and lower brackets (Figure a). Upper bolt will lock in place. NOTE: Panels should be oriented with logos on each panel facing out in opposite directions. Installer les Panneaux de barrière Installez le panneau avec les boulons de charnière sur les supports de charnière installés en insérant les boulons supérieur et inférieur dans les supports supérieur et inférieur (Figure a).
- Page 8 To Install Final Adjustments Adjust latch bolts and/or hinge bolts to ensure gap between gate and side of opening does not exceed 2.8” and 2.5’’(Figure a and b). NOTE: Gate may need to be removed to adjust bolts. NOTE: Always ensure gate is level before use (Figure d). Ajustez les boulons de verrou et/ou les boulons de charnière pour vous assurer que l’écart entre la barrière et le côté...
- Page 9 à chaque demande. Service a la clientèle - Téléphone: 1-877-274 0277 Telecopieur (604) 274-9727 Heures d’ouverture: 7h a 15h 00, (Heure normale du Pacifique) e-mail: parts@storkcraft.com : 1-877-274 0277 Fax (604) 274-9727 Horario de atención: 7:00 AM to 3:00 PM,...
Need help?
Do you have a question about the 01720-305-IW and is the answer not in the manual?
Questions and answers