Stop Playback - Sony FST-ZUX9 Operating Instructions Manual

To resume playback from the point
you stop the track – Resume Play
This system memorizes the point where
you stopped the playback. So you can
resume playback from that point.
1
While playing a track, press x to

stop playback.

"Resume" appears in the display.
2
Press NX (or N on the remote).
The system starts playback from the
point you stopped in step 1.
Resume Play is not cancelled even if you
change the funtion except
– you change to TUNER function when
CD/USB power manage is set to OFF.
To remove the USB device
1
Press x to stop playback.
2
Check that the REC/ERASE
indicator on the unit is light off.
3
Press "/1 to turn off the system.
4
Remove the USB device.
Other operations
To
Stop playback
Pause playback
Select the next or
previous folder
Select the next or
previous track
26 GB
Do this
x
Press .
To cancel resume
x
playback, press
twice. "RESUME"
disappears from the
display.
Press NX (or X on the
remote).
To resume playback,
press NX (or X on the
remote) again.
Press +/–.
Press . or >.
To Do this
1
Search for a track
on an USB device
by its folder name
and track name and
start playback the
2
track. (TRACK
SEARCH)
To return to the parent
folder, press RETURN.
Hold down m or M
Find a point in a
track on the remote during
playback, then release it
at the point you want.
Notes
• The following situations can increase the time
it takes to start playback:
– the folder structure is complex.
– the memory capacity is excessive.
• When the USB device is connected, the
system reads all the tracks on the USB device.
If there are many folders or tracks on the USB
device, it may take a long time to finish
reading the USB device.
• Do not connect the system and the USB
device through a USB hub.
• Depending on the previous operation you
have performed with the USB device, the
operation time for the USB device may vary.
• If the system is turned off or a power failure
occurs during "RESUME", then you turn on
the system and start playback, the system will
start playback from the beginning of the track
where you stopped playback.
• This system does not necessarily support all
the functions provided in a connected USB
device.
• The playback order for the system may differ
from the playback order of the connected
digital music player.
• Be sure to turn off the system before removing
the USB device. Removing the USB device
while the system is turned on may corrupt the
data on the USB device.
• You are recommended not to save other types
of tracks or unnecessary folders on a USB
device that has MP3 audio tracks.
Turn OPERATION
DIAL to select the
folder you want, then
press ENTER.
Turn OPERATION
DIAL to select the
track you want, then
press ENTER.