Page 1
Radial clamp MIX 10-307 Radial clamp MIX 10-307 including versions Version Description Pole type 10-307 Clamp (EU 25x10 mm rail) with V-stud 10-307-P Clamp (EU 25x10 mm rail) with plane stud 10-307-UK Clamp (UK 1¼ ” x ¼ ” rail) with V-stud 10-307-UK-P Clamp (UK 1¼...
Page 2
Intended use Clamp intended to attach and position accessories, with a pole size Ø 16-20 mm, to the accessory rail on operating and examination tables. The product is to be used by medical professionals within a medical facility. Safety regulation Maximum load: 10 kg inward load over the OR-table and 20 kg outward load away from the OR-table, according to EN 60601-1 and EN 60601-2.
Page 4
Maintenance Service, preventive maintenance, adjustment and repair shall be performed by authorized personnel only. Altering the construction without a written consent from the manufacturer, is strictly forbidden. Cleaning Clean with antiseptic detergent with pH 6 – 8 and warm water. Ethanol can be used. Wipe dry with soft cloth.
Page 6
Technical specification Maximum workload 10 kg inward load over the OR-table and 20 kg outward load away from the OR-table, according to EN 60601-1 and EN 60601-2. Weight 1,1 kg Material clamp Stainless steel Aluminum Dimension Version UDI-DI (H x W x L) 10-307 07350111830137 160 x 65 x 125 mm...
Page 7
Reison Medical AB Eriksbergsvägen 32A 734 92 Hallstahammar SWEDEN +46 (0)220 433 99 order@reison.se info@reison.se...
Need help?
Do you have a question about the MIX 10-307 and is the answer not in the manual?
Questions and answers