Test Tone/Signal Generator Insert - E-Mu 1212M Owner's Manual

To Add a Trim Pot Insert
Right-Click over any of the Insert sections. A pop-up dialog box appears.
1.
Select Insert Trim Control from the list of options. A Trim Pot insert appears in the
2.
insert location.
Click on the Trim Pot insert to view and adjust the controls in the TV screen.
3.
To move the Trim Pot to another location, simply drag and drop it into the desired
4.
position.

Test Tone/Signal Generator Insert

The test tone/signal generator insert is a handy troubleshooting aid which outputs a
calibrated sine wave, white noise or pink noise. This tool, in combination with an
insert meter, allows you to accurately measure the signal gain or attenuation of an
internal or external device. The test tone can also be quite handy for tuning up musical
instruments.
The Sine Wave Oscillator frequency is variable from 20Hz-20kHz. The level is variable
from off to +30dB.
White Noise is a mixture of all frequencies in the audio spectrum at the same average
level (analogous to white light in the visible spectrum).
Pink Noise provides equal power distribution per octave. (White noise has more
power in the higher octaves.) Pink noise and white noise are useful as wideband sound
sources.
Using the Test Tone and Meter Inserts for Troubleshooting
Sometimes it's useful to have a continuous tone to verify that you have the signal
path routed correctly in hardware or software. First insert a Test Tone and/or a
Meter(s) into a strip, then follow the tone through the system by ear or by moving
the meter. A test tone is quite handy when first setting up your recording software.
Right-Click over the Insert section in question. A pop-up dialog box appears.
1.
Select Insert Test Tone/Signal Generator from the list of options. A Test Tone
2.
insert appears in the insert location.
Click on the Test Tone insert to view and adjust the controls in the TV screen.
3.
To move the Test Tone to another location, simply drag and drop it into the
4.
desired position.
E-MU PCI Digital Audio Systems
Signal Type
(Sine wave, White or Pink Noise)
Sine Wave Oscillator Frequency
Test Signal Output Level
4 - The PatchMix DSP Mixer
Mixer Strip Creation
Musical Note Freq.
A = 440 Hz
B = 493.88 Hz
C = 523.25 Hz
D = 587.33 Hz
E = 659.26 Hz
F = 698.46 Hz
G = 783.99 Hz
43