Recording - E-Mu 1212M Tutorials Manual

Using the Mono Inputs as a Stereo Pair
Notice that the mono input channels are panned hard left and hard right. This has
6.
been done so that the two mono inputs can be used as a stereo pair. The two mono
channels will be combined into one stereo signal in the Aux Bus.
If you wish to use the two mono inputs as a stereo pair, simply turn up the Aux 1
7.
Sends for both mono channels. (To record in mono, just turn up one channel.)

3 - Recording

Click the red Record button on the
1.
WaveLab Lite transport controls. The
Record Window shown below appears.
You should see meter activity on these
2.
meters when your input signal is being fed
into the Digital Audio System.
Click on the bar to open the Audio File Format properties. The dialog box shown
3.
below appears.
Set the recording properties as desired, then click OK.
4.
m m
E-MU 1616/1616 /1212 PCI Digital Audio System
Click here for:
Audio File Format
Properties
Tutorials
Steinberg WaveLab Lite
17