Download Print this page

Vigor 530 Quick Start

Usb2.0 adapter

Hide thumbs Also See for 530:

Download this manual

Vigor 530 USB2.0 Adapter

Quick Start to Wireless Networking

1 Installation

1. Insert the installation CD. It automatically starts the setup program for

software installation.

2. Follow the installation wizard to complete the software installation process

(restart your computer if necessary).

3. Connect the Vigor 530 USB 2.0 Adapter to your PC/notebook PC.

NOTE! Please use USB extension cable to connect the Vigor 530 USB 2.0

Adapter with your PC/Notebook during normal operation.

4. Operation System will detect new device and verify the driver automatically.

Page 1 (restart your computer if necessary). 3. Connect the Vigor 530 USB 2.0 Adapter to your PC/notebook PC. NOTE! Please use USB extension cable to connect the Vigor 530 USB 2.0 Adapter with your PC/Notebook during normal operation. 4. Operation System will detect new device and verify the driver automatically.
Page 2 Windows 2000/XP: Select “Install the software automatically” when the window with this option appears, and then click “Next” to continue installation. NOTE! In Windows XP, it is recommended that you use the Vigor 530 USB2.0 adapter Setting. Please check User’s Manual Chapter 3.1.2 to disable the...
Page 3 2. Connecting to an Existing Network 1. Double click on the shortcut icon or go to windows Start > Programs > Vigor 530 > Vigor 530 USB2.0 adapter Setting to open the Setting window. You can also see a small link-status icon in Windows System Tray.
Page 4 4 Go to “Status” Tab to view network link status. 5 For details of each tab in Vigor 530 USB2.0 adapter Setting, please read User’s Manual Chapter 4.