Important Safety Instructions - PRO-PULSE CT119-C Operator's Manual

TABLE OF CONTENTS

PARTS LIST FOR DRILL

PARTS LIST FOR JIGSAW

PARTS LIST FOR CIRCULAR SAW

PARTS LIST FOR WORK LAMP

IMPORTANT SAFETY INSTRUCTIONS

PRECAUTIONS FOR BATTERY AND CHARGER

SPECIFICATIONS

OPERATING NOTES FOR BATTERY PACK

OPERATING NOTES FOR DRILL

OPERATION NOTES FOR JIGSAW

OPERATION NOTES FOR CIRCULAR SAW

OPERATION NOTES FOR WORK LAMP

MAINTENANCE
 WARRANTY
WARNING: When using electric tools, machines or equipment, basic safety
precautions should always be followed to reduce the risk of fire, electric shock,
and personal injury.

IMPORTANT SAFETY INSTRUCTIONS

ALL
READ INSTRUCTIONS BEFORE USING THIS TOOL
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. CONSIDER WORK AREA ENVIRONMENT. Don't use power tools in damp,
wet, or poorly lit locations. Don't expose your tool to rain. Keep the work area
well lit. Don't use tools in the presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. All children should be kept away from the work area.
Don't let them handle machines, tools, or extensions cords.
4. STORE IDLE EQUIPMENT. Store equipment in a dry area to inhibit rust.
Equipment also should be in a high location or locked up to keep out of reach of
children.
5. DON'T FORCE THE TOOL. It will do the job better and more safely at the rate
for which it was intended.
6. USE THE RIGHT TOOL. Don't force a small tool or attachment to do the work
of a larger industrial tool. Don't use a tool for a purpose for which it was not
intended.
7. DRESS PROPERLY. Don't wear loose clothing or jewelry, they can be caught
in moving parts. Protective, non-electrically conductive gloves and non-skid
footwear are recommended when working. Wear protective hair covering to
contain long hair and keep it from harm.
8. USE EYE PROTECTION. Use a full face mask if the work you're doing
produces metal filings, dust, or wood chips. Goggles are acceptable in other
situations. Wear a clean dust mask if the work involves creating a lot of fine or
coarse dust.
9. DO NOT TOUCH BIT WITH HANDS AFTER DRILLING. Bit can become
extremely hot after job is completed.
10. SECURE WORK. Use clamps or a vise to hold the work if possible. It's safer
than using your hands and it frees both hands to operate the tool.
11. DON'T OVERREACH. Keep proper footing and balance at all times. Do not
reach over or across machines which are running.
18
CT119-C
p.14
p.15
p.16
p.17
p.18
p.19
p.20
p.20
p.21
p.22
p.23
p.24
p.24
p.24
!