Table Of Contents - Elcometer 270 User Manual

CONTENTS
Section
1 Gauge Overview
2 Box Contents
3 Getting Started
3.1 Fitting the Batteries
3.2 Battery Condition
3.3 Switching On / Off
3.4 Selecting the Voltage
3.5 Calibration Test
4 Using the Elcometer 270
5 Spares & Accessories
6 Warranty Statement
7 Technical Specification
8 Legal Notices & Regulatory Information
For the avoidance of doubt, please refer to the original English language version.
Dimensions: Detector (without Wand): 210 x 42 x 37mm (8.3 x 1.7 x 1.5")
Weight: Detector, Wand Assembly, Batteries & Connecting Cable: 610g (21oz)
A Material Safety Data Sheet for the Wetting Agent (Kodak Photo-Flo™) supplied as an accessory for the
Elcometer 270 is available to download via our website:
http://www.elcometer.com/images/stories/MSDS/elcometer_270_wetting_agent.pdf
© Elcometer Limited 2009 - 2016. All rights reserved. No part of this document may be reproduced, transmitted,
transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any
means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of
Elcometer Limited.
en-1
R
Page
en-2
en-3
en-3
en-3
en-3
en-3
en-4
en-4
en-5
en-6
en-7
en-7
en-7
www.elcometer.com