Advertisement
Step 7
Ball Drop Assembly
REPEAT STEP 7 A-E FOR THE BALL DROP
ON THE OTHER SIDE OF THE TABLE
Locate the ball drop
assembly hole on the side of
cabinet wall. It will be
directly in the middle of table
and will have 3 punched pilot
holes surrounding it. (A)
Place ball drop into the hole. (B)
Ensure that the screw holes align
with the pilot holes. (C)
Using three M2.8 x 11.5
screws, fasten the ball
holder to the table. (D,E)
3 required
M2.8 x 11.5
1 required
13
Advertisement
