Table of Contents
Advertisement
Moving smoothly
Moving smoothly
Check the position of
the Rack Feed Lever.
2-8: RELAY PCB ASS'Y (Refer to Fig. 2-8-A)
Remove the screw 1.
1.
2.
Remove the Relay PCB Ass'y.
Relay PCB Ass'y
• Screw Torque: 4 ± 0.5kgf•cm
NOTE
1. When installing the wire of the Relay PCB, install it
correctly as Fig. 2-8-B.
DISASSEMBLY INSTRUCTIONS
Fig. 2-7-B
Should not be engaged.
Fig. 2-7-C
Main Chassis Ass'y
1
Fig. 2-8-A
Fig. 2-8-B
2-9: GEAR (Refer to Fig. 2-9-A)
Unlock the support 1.
1.
2.
Remove the Middle Gear 1/2/3, Idler Gear and Feed Gear.
Middle Gear 2
Middle Gear 3
Idler Gear
Main Chassis Ass'y
NOTE
1.
In case of the Idler Gear installation, install correctly as
Fig. 2-9-B.
2.
When installing the Middle Gear 2, check if the Middle
Gear 2 is locked correctly as Fig. 2-9-C.
[OK]
Idler Gear
Idler Arm
2-10: IDLER ARM (Refer to Fig. 2-10-A)
1.
Remove the Idler Arm Spring.
2.
Remove the Chassis Spring.
3.
Remove the Idler Arm.
Idler Arm Spring
Main Chassis Ass'y
B2-3
Middle Gear 1
Feed Gear
1
[NG]
Idler Gear
Idler Arm
Check Lock
Middle Gear 2
Idler Arm
Chassis Spring
Fig. 2-9-A
Fig. 2-9-B
Fig. 2-9-C
Fig. 2-10-A
Advertisement
Table of Contents
